Configuring Quality of Service

Defining General QoS Settings

Defining Queues

The Queue Page contains fields for defining the QoS queue forwarding types.

To set the queue settings:

1.Click Basic Setup > Quality of Service > Global Parameters > Queue. The Queue Page opens.

Figure 160:Queue Page

The Queue Page contains the following fields:

Strict Priority — Specifies whether traffic scheduling is based strictly on the queue priority.

WRR — Assigns WRR weights to queues. This field is enabled only for queues in WRR queue mode. If a queue is set to 0 weight, the queue is not operational and is effectively closed. Each queue has a weight range, queues 1-3 have the range 0-255, and queue 4 has the range 1-255.

WRR Weight — Assigns the specific WRR value to the Queue.

% of WRR Bandwidth — Displays the amount of bandwidth assigned to the queue. These values are fixed and are not user defined.

2.Select Strict Priority or WRR Fields.

3.Click . The queue settings are set, and the device is updated.

Page 243

Page 244
Image 244
D-Link DWS/DXS-3200 manual Defining Queues, Select Strict Priority or WRR Fields