D-Link DWS/DXS-3200 manual Click . The Port Security Settings Page opens

DXS/DWS 3200 Series User Guide

–Not in Auto Mode — Indicates that the port control is Forced Authorized, and clients have full port access.

–Single-host Lock — Indicates that the port control is Auto and a single client has been authenticated via the port.

•Learning Mode — This mode has 2 value options: 'Classic Lock' and 'Limited Dynamic Lock'. Classic Lock - immediately lock the port from learning new MAC Addresses. Limited Dynamic Lock - this parameter depends on the 'Max Entries' parameter value

•Max Entries — Number of MAC addresses which the port learns until the Limited Dynamic Lock parameter locks it.

•Action — Indicates the action to be applied to packets arriving on a locked port. The possible field values are:

–Forward — Forwards packets from an unknown source without learning the MAC address.

–Discard — Discards packets from any unlearned source. This is the default value.

–Shutdown — Discards packets from any unlearned source and shuts down the port. The port remains shut down until reactivated, or until the device is reset.

•Trap — Enables traps when a packet is received on a locked port. The possible field values are:

–Checked — Enables traps.

–Unchecked — Disables traps.

•Trap Frequency (Sec) — The amount of time (in seconds) between traps. The default value is 10 seconds.

2.Click . The Port Security Settings Page opens:

Figure 60: Port Security Settings Page

3.Modify the fields.

4.Click . The port security settings are defined, and the device is updated.

Page 110