DXS/DWS 3200 Series User Guide

Starting the D-Link Embedded Web Interface

Notes

Disable the popup blocker before beginning device configuration using the EWS.

This section contains information on starting the D-Link Embedded Web interface. To access the D-Link user interface:

1.Open an Internet browser.

2.Ensure that pop-up blockers are disabled. If pop-up blockers are enable, edit, add, and device information messages may not open.

3.Enter the device IP address in the address bar and press Enter. The Enter Network Password Page opens:

Figure 21: Enter Network Password Page

4.Enter your user name and password.

Notes

The device is configured with a user name that is admin and a password that is blank, and can be configured without entering a password.

Passwords are case sensitive.

To operate the device, disable all pop-ups with a popup blocker.

5.Click . The D-Link Embedded Web Interface Home Page opens:

Page 52

Page 53
Image 53
D-Link DWS/DXS-3200 Starting the D-Link Embedded Web Interface, Click . The D-Link Embedded Web Interface Home Page opens