Managing Device Diagnostics

Viewing Optical Transceivers

Viewing Optical Transceivers

The Optical Transceiver page allows network managers to perform tests on Fiber Optic cables. Optical transceiver diagnostics can be performed only when the link is present. To test cables:

Click System > Diagnostics > Optical Transceivers tab. The Optical Transceivers Page opens:

Figure 186: Optical Transceivers Page

The Optical Transceivers Page contains the field:

Port — Displays the port IP address on which the cable is tested.

Temperature — Displays the temperature (C) at which the cable is operating.

Voltage — Displays the voltage at which the cable is operating.

Current — Displays the current at which the cable is operating.

Output Power — Indicates the rate at which the output power is transmitted.

Input Power — Indicates the rate at which the input power is transmitted.

Loss of Signal — Indicates if a signal loss occurred in the cable.

Note

This page is dependent on the optical transceiver. If the information is not provided or supported by the transceiver, the switch would not be able to provide such information.

Page 279

Page 280
Image 280
D-Link DWS/DXS-3200 manual Viewing Optical Transceivers, Optical Transceivers Page contains the field