D-Link DWS/DXS-3200 manual Creating Class Maps, Class maps

Configuring Quality of Service

Configuring Advanced QoS Settings

Creating Class Maps

One IP ACL and/or one MAC ACL comprise a class map. Class maps are configured to match packet criteria, and are matched to packets on a first-fit basis. For example, Class Map A is assigned packets based only on an IP-based ACL or a MAC-based ACL. Class Map B is assigned to packets based on both an IP-based and a MAC-based ACL. To define

class maps:

1.Click Advance Setup > Quality of Service > Policy Properties> Class Map. The Class Map Page opens:

Figure 165: Class Map Page

The Class Map Page contains the following fields:

•Class-Map Name — Displays the user-defined name of the class map.

•Preferred ACL — Indicates if packets are first matched to an IP based ACL or a MAC based ACL.

•ACL 1— Contains a list of the user defined ACLs.

•Match — Indicates the criteria used to match class maps with an ACL’s address. Possible values are:

–And — Matches both ACL 1 and ACL 2 to the packet.

–Or — Matches either ACL 1 or ACL 2 to the packet.

•ACL 2 — Contains a list of the user defined ACLs.

•Remove — Removes Class Maps. The possible field values are:

–Checked — Removes the selected Class Maps.

–Unchecked — Maintains the current Class Maps.

2.Click. The Add Class Map Page opens.

Page 249