Disarm | 3 | disarmed with Low battery indicator |
Disarm | 4 | System disarmed with Tamper Alert |
Disarm | 5 | System disarmed with NPC active. |
Table of zones
A zone is represented by the number of LED flashes used by the system to identify a particular type of input. Standard input assignments are listed in the following table, along with spaces to write in any optional sensors or switches that have been installed.
Zone | Description |
| Dealer installed options |
1 | Trunk Pin |
|
|
2 | Instant trigger: a heavier impact |
| |
| detected by the onboard shock |
| |
| sensor |
|
|
3 | Door switch trigger |
|
|
4 | Instant trigger: For | optional |
|
| sensors |
|
|
5 | Ignition trigger |
|
|
6 | Hood Pin |
|
|
Interpreting zone diagnostics
Warn Away responses are not reported by arming or disarming diag- nostics. If you receive a Bypass notification when arming or a Tamper Alert notification when disarming, look at the LED on the control cen- ter.
Active or triggered zones will be indicated by a pattern of blinks by the LED.
© 2008 Directed Electronics. All rights reserved. | 43 |