Front Control Panel, continued
Status Indicator
Indicator Color | TV Condition | Additional Information |
|
|
|
None (indicator | Normal TV on or standby condition. | Normal operation. |
off) |
|
|
Yellow, steady | Room temperature is too high. | TV will not operate when the ambient room |
|
| temperature is too high. Turn off the TV and wait |
|
| until the room temperature drops. |
|
|
|
Red, either steady | TV may require service. | Turn off the TV and unplug the set from the AC power |
or blinking |
| source. Wait one minute and then plug the set back |
|
| in. |
|
| If the LED is still on, contact your dealer or a |
|
| Mitsubishi Authorized Service Center. See www. |
|
| |
|
| Authorized Service Center information. |
|
|
|
Lamp Indicator
Indicator Color | TV Condition | Additional Information |
|
|
|
None (indicator | Normal TV on or standby condition. | Normal operation. |
off) |
|
|
|
|
|
Green, rapid | TV just powered off and lamp is | Begins to blink 30 seconds after turning off TV. |
blinking | cooling. | TV can be turned on before it begins to blink or |
|
| after the blinking stops, but not while the indicator |
|
| is blinking. Normal operation. |
|
|
|
Yellow, steady | Lamp nearing end of useful life. | This is a recommendation to have a new lamp |
|
| ready before the current lamp stops illuminating. |
|
| See Appendix H for ordering information. |
Yellow, blinking | 1. Lamp access door is open or not | TV will not operate until lamp access door |
| secure. | is secure. See Appendix H for installation |
|
| information. |
|
|
|
| 2. No lamp installed. | TV will not operate without a lamp. See Appendix |
|
| H for installation information. |
|
|
|
Red, steady | Lamp no longer illuminates and has | Replace the lamp. The TV will not operate when |
| reached the end of the lamp life. | the lamp no longer illuminates. See Appendix H |
|
| for installation information. |
|
|
|
Chapter 1. Television Overview | 13 |