Mitsubishi Electronics WS-48515, WS-65515A, WS-73615 Single Antenna, Separate UHF and VHF Antennas

Page 16
(not for use with CableCARD™)

Connecting a Single Analog Antenna or Separate UHF and VHF Antennas

Single Antenna

Figure 3

A300-Ohm to 75-Ohm transformer is required. This is not included with the TV.

Separate UHF and VHF Antennas

Figure 4

A UHF/VHF combiner is required. This is not included with the TV.

For antennas with twin flat lead

1.For antenna with twin flat leads, connect the

300-Ohm twin leads to the 300-Ohm to 75-Ohm transformer.

2.Push the 75-Ohm side of the transformer onto ANT-1 MAIN on the TV back panel.

1.Connect the UHF and VHF antenna leads to the UHF/VHF combiner.

2.Push the combiner onto ANT-1 MAIN on the TV back panel.

VHF Antenna

UHF Antenna

(Channels 2-13)

(Channels 14-69)

For antennas with coaxial lead

3.Connect the coaxial lead directly to ANT-1 MAIN on the TV back panel.

Flat Twin Lead

External Antenna or Cable

Flat Twin Lead

300-Ohm

 

 

75-Ohm

FlatTwin

 

 

Coaxial

Lead

 

 

 

 

Cable

3.

 

ANT-1

 

MAIN

2.

– (DTV/CABLE /VHF/UHF) –

1.

TV back panel (section detail)

Optional 300-Ohm

to 75-Ohm

 

Matching Transformer

 

 

TV back panel (section detail)

300 Ohm to

 

75 Ohm

ANT-1

Combiner

MAIN

UHF

 

VHF

2.

 

– (DTV/CABLE /VHF/UHF) –

Back

Side

1.

 

Figure 4. Connecting separate UHF and VHF Antennas

Figure 3. Connecting an Antenna

Mitsubishi strongly recommends against using antennas with twin flat leads. Twin flat lead antenna wires are subject to interference which may adversely affect the performance of the TV. We recommend using coaxial antenna cable.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Projection Television Owner’s Guide Risk of Electric Shock Contents Important Safeguards Important SAFEGUARDS, cont’d Our Thanks Mitsubishi Digital Electronics America, IncChapter Television OverviewTV Accessories Special FeaturesPOWER/TIMER Indicator Front Control PanelBack Panel IEEE-1394 Input/OutputDigital Audio Output CableCARD SlotIR Output-NetCommand Hdmi or DVI DevicesDVI Analog Audio Component InputsLetterbox top/bottom black bars Side bar imagesNews and stock-market report bars Shopping channel logos & pricing displaysConnecting Connecting External Devices & NetCommand Setup ChartConnecting a Wall Outlet Cable or Cable Box Cable Box compatible with PIP/POPSingle Antenna Separate UHF and VHF AntennasFor antennas with twin flat lead For antennas with coaxial leadVCR to Antenna or Wall Outlet Cable RedConnecting VCR Video and Audio to a Cable Box VCR to a Cable BoxReceiver or Stereo System Satellite Receiver or Other Device with S-VideoDVD Player with Component Video Connecting a DVD Player with Component Video or DVI DeviceDVI Device Hdmi Device External DTV Receiver with Component VideoConnecting the IR Emitter NetCommand IR Emitter NetCommandConnecting Ieee 1394 Devices Pin Style vs -Pin StyleIeee 1394 Device Connection Styles Connection StylesDirect Device-To-Device Style Hub Connection StyleCableCARD Definition and Initial Screen Display Using a CableCARDCableCARD Technology Connecting Helpful Hints NetCommand Setup and Editing NetCommand Pre-Memorized Devices DeviceRemote Control Functions Overview FollowingRemote Control FunctionsOperation, Care, Sleep Timer Sleep TimerOperation CareNetCommand On-Screen Buttons Remote Control Buttons 3D Graphical Menu SystemNetCommand Initial Setup NetCommand Information ScreenDevice Setup Screen Welcome ScreenReview Screen Finish ScreenReceiver Screen Edit NetCommand, Adding an A/V ReceiverReceiver Inputs Receiver Input Learn Screen Receiver Learn ScreenName Screen Monitor Out to AVR ScreenEdit NetCommand, Adding Devices Edit NetCommandAdd Screen Device ScreenDevice Learn Screen Device Advanced Learn ScreenConnection for Device Screen VCR for Recordings ScreenRF Connection for Cable Screen IR Code for Device ScreenChange Screen Delete ScreenDevice Selection Menu Using the Device Menu Button to Display Menus Device MenuIR Controlled Devices/IEEE 1394 Menus CableCARD MenuIeee 1394 Devices and NetCommand Controlled Recordings Adding Ieee 1394 Devices Automatically Adding Ieee 1394 Devices AutomaticallyNew 1394 Device Screen Name for 1394 Device ScreenIeee 1394 Device Type Screen Connection ScreenDigital Video Signals Digital Audio SignalsDigital Control Signal Ieee 1394 Devices CompatibilityUsing the Guide Button to Display ChannelView and Menus NetCommand Controlled Recordings Record To SetupTime-Delayed Recording Recording NowCancel Current Recordings Record List ScreenDisc Search Track List ScreenDirect VCR Recording from an Antenna or Cable Source Direct VCR RecordingRestrictions for Traditional VCRs NetCommand Controlled Peer-to-Peer Connections What is a Peer-to-Peer Connection?Setting up a Peer-to-Peer Connection Canceling a Current Peer-to-Peer ConnectionImportant Notes TV Menu Screen Operations Main Menu Choices Setup Menu Reset Factory Defaults Menu Advanced ConvergenceNetCommand Menu Antenna Menu SQV SuperQuickView Setting the Clock Timer On/OffTime Menu ManualCaptions Menu Captions MenuAnalog Captions Digital CaptionsFonts SizeColor Opacity FontChip Lock Menu ChipEntry Chip Start Time and V-Chip Stop TimeContent Categories Chip Signal InformationTV Ratings Lock By Time Front Button LockAudioVideo Menu AudioVideoSetting Descriptions Analog and Digital Audio SettingAnalog Only Audio Settings Digital Only Audio SettingsVideo Settings ContrastChapter Format Signals Display FormatsFormat Definitions DVD DefinitionsOriginal Signal Operation of PIP and POP Changing PIP/POP DeviceDevice Menu with Net Command Ieee 1394 Devices Digital Bypassing the V-Chip Lock Appendix a Bypassing the V-Chip LockBypassing Front Button Lock This page intentionally blank Appendix B High Definition Input Connection Compatibility Input Levels and Timing with Component Video SignalsComponent-1 and Component-2 Inputs Appendix CRemote Control Programming Codes Programming the Remote to Control NetCommand A/V ProductsAppendix C Remote Control Programming Codes DVD PlayersCable Boxes and Satellite Receivers ReceiversMitsubishi A/V Receivers Mitsubishi CD Players Not all functions for all modelsAppendix D On Screen Information Displays Appendix E NetCommand Specialized Device Keys Checkbox NameAppendix F Cleaning and Service Appendix G Diamond Shield Removal for Models For the WS-48515For the WS-55515, WS-65515 and WS-65515A For additional assistance, call 800For the WS-55615, WS-55615A, WS-65615 and WS-65615A Appendix G, Diamond Shield Installation for Model WS-73615 Appendix H Cabinet Separation for Models WS-65515, WS-65515A, WS-65615, WS-65615A, WS-73615Troubleshooting Problem Possible SolutionTroubleshooting Troubleshooting Using The System Reset Button Demo Mode Additional InformationIndex Menu 56 Mitsubishi Projection TV Limited Warranty Mitsubishi Projection Television Limited WarrantyMitsubishi TV Software Page Mitsubishi Digital Electronics America, Inc D405A10

WS-48515, WS-55615A, WS-55615, WS-73615, WS-65515A specifications

The Mitsubishi Electronics WS series of rear-projection televisions, specifically models WS-65615, WS-65515, WS-65615A, WS-55515, and WS-65515A, represent a significant era in home entertainment technology. Known for their innovative features and exceptional image quality, these models were well-regarded for both functional performance and design.

One of the most notable characteristics of the WS series is their use of DLP (Digital Light Processing) technology. This allows for sharper images and more vibrant colors compared to traditional CRT televisions. DLP technology also reduces issues like pixelation, offering a smoother image overall. The WS-65615 and WS-65615A feature a large 65-inch screen, delivering an immersive viewing experience perfect for movie nights and gaming. Meanwhile, the WS-65515 and WS-65515A provide a slightly smaller 55-inch display, which still offers remarkable visuals without taking up as much space.

All models are equipped with a High-Definition Multimedia Interface (HDMI) input, ensuring compatibility with modern devices like Blu-ray players, gaming consoles, and streaming devices. This connectivity is crucial for those looking to enhance their entertainment systems with the latest technology. Additionally, the WS series supports various audio-video formats, giving users flexibility in how they enjoy their content.

Another key feature is the incorporation of a 3D-ready capability, making these TVs future-proof for a time when 3D content was gaining traction. This aspect attracted cinema enthusiasts who wanted to bring an enhanced experience home. The models also include a built-in digital tuner, allowing users to access over-the-air broadcasts without needing an external box.

The WS-65615 and WS-65515 models additionally boast a stylish and slim design that fits well within modern living spaces, combining aesthetics with functionality. Their lightweight construction allows for easier installation and setup.

Overall, the Mitsubishi Electronics WS-65615, WS-65515, WS-65615A, WS-55515, and WS-65515A televisions deliver a compelling mix of advanced technologies, user-friendly features, and stunning visuals. While they may be considered legacy models today, they still exemplify the quality and innovation Mitsubishi Electronics strived for in enhancing the home viewing experience.
Top Page Image Contents