Mitsubishi Electronics WS-65515A, WS-65615A Advanced Convergence, Reset Factory Defaults Menu

Page 58

Setup Menu, continued

Convergence, continued

Figure 10

When the Red and Blue crosshairs are properly converged, the center-screen crosshairs will appear white. You can press ADJUST , ,orto move the Red and Blue crosshairs. Press VIDEO to switch between Red and Blue. Press AUDIO for the Advanced Convergence screen.

Red

Press ADJUST to converge the lines.

Press VIDEO to switch from Red to Blue.

Press MENU to go back.

Press CANCEL to delete changes.

Press AUDIO for Advanced Convergence.

Figure 10. Red Convergence Menu

Advanced Convergence

Figure 11

After adjusting the Red Convergence and Blue Convergence, you can fine-tune your TV by adjusting the Red and Blue convergence at 64 individual points.

1.Move the flashing bracket to a position needing adjustment by pressing ADJUST , , or .

2.Press ENTER to select the position (flashing will stop).

3.Move the Red or Blue line by pressing , , or .

4.Press ENTER to deselect the position (flashing will resume), and move the brackets to the next position needing adjustment.

5.Press VIDEO to switch between the Red and Blue lines. A position is properly converged when all three lines combine to appear white.

6.When completed, press MENU or HOME to save your changes, and exit the Advanced Convergence screen.

7.You may also press INFO to display detailed instructions on using the Advanced Convergence. Then press INFO or MENU to return to the Advanced Convergence menu.

Press INFO for help

Figure 11. Advanced Convergence Menu

IMPORTANT

Although there are more than 64 line intersections, the flashing bracket only stops at 64 adjustment positions.

Reset Factory Defaults Menu

Figure 12

This allows you to reset the convergence to the original factory settings. The message “Convergence reset completed” will be displayed when the factory defaults have been restored.

WARNING: RESET CONVERGENCE TO

FACTORY DEFAULTS.

All manual changes to red and blue convergence and advanced convergence will be deleted.

Press ENTER to Reset convergence to the defaults.

Press HOME or MENU to return to the menu without resetting convergence.

Figure 12. Reset Factory Defaults Menu

58

Image 58

Contents

Projection Television Owner’s Guide Risk of Electric Shock Contents Important Safeguards Important SAFEGUARDS, cont’d Our Thanks Mitsubishi Digital Electronics America, IncChapter Television OverviewTV Accessories Special FeaturesPOWER/TIMER Indicator Front Control PanelDigital Audio Output Back PanelIEEE-1394 Input/Output CableCARD SlotDVI Analog Audio IR Output-NetCommandHdmi or DVI Devices Component InputsNews and stock-market report bars Letterbox top/bottom black barsSide bar images Shopping channel logos & pricing displaysConnecting Connecting External Devices & NetCommand Setup ChartConnecting a Wall Outlet Cable or Cable Box Cable Box compatible with PIP/POPFor antennas with twin flat lead Single AntennaSeparate UHF and VHF Antennas For antennas with coaxial leadVCR to Antenna or Wall Outlet Cable RedConnecting VCR Video and Audio to a Cable Box VCR to a Cable BoxReceiver or Stereo System Satellite Receiver or Other Device with S-VideoDVD Player with Component Video Connecting a DVD Player with Component Video or DVI DeviceDVI Device Hdmi Device External DTV Receiver with Component VideoConnecting the IR Emitter NetCommand IR Emitter NetCommandConnecting Ieee 1394 Devices Pin Style vs -Pin StyleDirect Device-To-Device Style Ieee 1394 Device Connection StylesConnection Styles Hub Connection StyleCableCARD Definition and Initial Screen Display Using a CableCARDCableCARD Technology Connecting Helpful Hints NetCommand Setup and Editing NetCommand Pre-Memorized Devices DeviceRemote Control Functions Overview FollowingOperation Remote Control FunctionsOperation, Care, Sleep TimerSleep Timer CareNetCommand On-Screen Buttons Remote Control Buttons 3D Graphical Menu SystemDevice Setup Screen NetCommand Initial SetupNetCommand Information Screen Welcome ScreenReview Screen Finish ScreenReceiver Screen Edit NetCommand, Adding an A/V ReceiverReceiver Inputs Receiver Input Learn Screen Receiver Learn ScreenName Screen Monitor Out to AVR ScreenEdit NetCommand, Adding Devices Edit NetCommandAdd Screen Device ScreenDevice Learn Screen Device Advanced Learn ScreenRF Connection for Cable Screen Connection for Device ScreenVCR for Recordings Screen IR Code for Device ScreenChange Screen Delete ScreenDevice Selection Menu IR Controlled Devices/IEEE 1394 Menus Using the Device Menu Button to Display MenusDevice Menu CableCARD MenuIeee 1394 Devices and NetCommand Controlled Recordings New 1394 Device Screen Adding Ieee 1394 Devices AutomaticallyAdding Ieee 1394 Devices Automatically Name for 1394 Device ScreenIeee 1394 Device Type Screen Connection ScreenDigital Control Signal Digital Video SignalsDigital Audio Signals Ieee 1394 Devices CompatibilityUsing the Guide Button to Display ChannelView and Menus Time-Delayed Recording NetCommand Controlled RecordingsRecord To Setup Recording NowDisc Search Cancel Current RecordingsRecord List Screen Track List ScreenDirect VCR Recording from an Antenna or Cable Source Direct VCR RecordingRestrictions for Traditional VCRs Setting up a Peer-to-Peer Connection NetCommand Controlled Peer-to-Peer ConnectionsWhat is a Peer-to-Peer Connection? Canceling a Current Peer-to-Peer Connection Important Notes TV Menu Screen Operations Main Menu Choices Setup Menu Reset Factory Defaults Menu Advanced ConvergenceNetCommand Menu Antenna Menu SQV SuperQuickView Time Menu Setting the ClockTimer On/Off ManualAnalog Captions Captions MenuCaptions Menu Digital CaptionsColor FontsSize Opacity FontEntry Chip Lock MenuChip Chip Start Time and V-Chip Stop TimeContent Categories Chip Signal InformationTV Ratings Lock By Time Front Button LockAudioVideo Menu AudioVideoAnalog Only Audio Settings Setting DescriptionsAnalog and Digital Audio Setting Digital Only Audio SettingsVideo Settings ContrastChapter Format Definitions Format SignalsDisplay Formats DVD DefinitionsOriginal Signal Operation of PIP and POP Changing PIP/POP DeviceDevice Menu with Net Command Ieee 1394 Devices Digital Bypassing the V-Chip Lock Appendix a Bypassing the V-Chip LockBypassing Front Button Lock This page intentionally blank Appendix B High Definition Input Connection Compatibility Input Levels and Timing with Component Video SignalsComponent-1 and Component-2 Inputs Appendix CRemote Control Programming Codes Programming the Remote to Control NetCommand A/V ProductsAppendix C Remote Control Programming Codes DVD PlayersMitsubishi A/V Receivers Cable Boxes and Satellite ReceiversReceivers Mitsubishi CD Players Not all functions for all modelsAppendix D On Screen Information Displays Appendix E NetCommand Specialized Device Keys Checkbox NameAppendix F Cleaning and Service For the WS-55515, WS-65515 and WS-65515A Appendix G Diamond Shield Removal for ModelsFor the WS-48515 For additional assistance, call 800For the WS-55615, WS-55615A, WS-65615 and WS-65615A Appendix G, Diamond Shield Installation for Model WS-73615 Appendix H Cabinet Separation for Models WS-65515, WS-65515A, WS-65615, WS-65615A, WS-73615Troubleshooting Problem Possible SolutionTroubleshooting Troubleshooting Using The System Reset Button Demo Mode Additional InformationIndex Menu 56 Mitsubishi Projection TV Limited Warranty Mitsubishi Projection Television Limited WarrantyMitsubishi TV Software Page Mitsubishi Digital Electronics America, Inc D405A10