Mitsubishi Electronics WS-55515, WS-65515A, WS-65615A, WS-73615, WS-55615, WS-48515 manual Antenna Menu

Antenna Menu

Figure 16

Figure 16. Antenna Menu

Antenna Menu

The Antenna Menu options are available for use with analog and digital channels on Antenna-1 and Antenna-

2.You can memorize, add or delete, name and add channels to an SQV (Super Quick View™) list.

Memorize

For Antenna-1 (Main) or Antenna-2 (Aux)

Select either Air (when used with an indoor/outdoor antenna) or Cable (when used with direct cable) then press ENTER to start the automatic channel memorization process. If a CableCARD is being used, memorized channels are provided by your cable provider through the CableCARD.

To stop the automatic channel memorization process, press CANCEL. Channels memorized before you pressed CANCEL are retained in memory.

After memorizing channels, the channels in the memory can be accessed in ascending or descending order or by pressing CH or .

The memorization will occur twice, as the TV memorizes analog and digital channels separately.

Prefer Digital

If a memorized channel is shown both as an analog and digital channel, a check mark in the Prefer Digital box will show the digital and hide the analog channels, when using CH. Removing the checkmark will show both analog and digital choices.

Channel

For additional Channel editing, press ADJUST or to select the channel or press CH or for channels already in memory. Channels can also be selected by using the number buttons. To immediately tune to the listed channel, press ENTER after entering the number(s).

For digital channels, when the broadcaster has sent a virtual channel number, the virtual channel number is shown in the text box and the original digital channel is shown below on-screen, as a reference. Press SUB on the remote to enter a separator for digital numbers.

Memory

After the available channels have been memorized with Memorize, weaker channels can be added. Unwanted channels can also be deleted. Press CH or on the remote control to see the channels in memory. Press ADJUST or to select Added or Deleted for the channel shown in the Channel number box.

Name

Analog channels shown on Antenna-1 or Antenna-2 can be named (up to four characters). After you enter a name, it will appear on the TV screen, next to the channel number.

1.Press ADJUST or to select each letter.

2.Press ENTER to set the letter and move to the next letter position.

3.Press CANCEL to move back one position.

Digital channels are automatically named if the broadcaster sends the information.