Mitsubishi Electronics WS-65615A Adding Ieee 1394 Devices Automatically, New 1394 Device Screen

Page 46

Adding IEEE 1394 Devices Automatically

Adding IEEE 1394 Devices

Automatically

When an IEEE 1394 device is connected into the TV network and is powered On, the new device will automatically announce its presence. This process is called device discovery and can take up to 1 minute. Some non-audio/video or non-compatible IEEE 1394 devices, such as Personal Computers (PCs), may not announce their presence to the TV. The TV will not be able to show these devices in the Device Selection menu, however, they can coexist and will still be available to other devices on the IEEE 1394 network that are compatible with these non-audio/video devices.

IEEE 1394 cable boxes and satellite receivers may require that you use the remote control that came with those devices. For some compatible devices, the Cable/DBS/DTV position of the TV remote control may be able to control operation.

New 1394 Device Screen

Figure 1

When your TV discovers a new IEEE 1394 device, the New 1394 Device screen will appear. Selecting “Add” will include the device in the Device Selection menu.

Selecting “Do Not Add” will not add the device to the Device Selection menu. If the IEEE 1394 device does not provide audio and video, you may not want to add that device to the TV’s Device Selection menu. Devices that were discovered but not added to the Device Selection menu will still be listed in the Review screen of the Edit NetCommand® menu.

Name for 1394 Device Screen

Figure 2

If you choose to add the discovered IEEE 1394 device, the Name for 1394 Device screen will appear. Name the device or use the default name that appears automatically.

Some IEEE 1394 digital devices, such as some DVCRs, can also operate as analog devices. For example, some DVCRs can record and play as VHS or S-VHS, in addition to D-VHS. This allows you to play analog rental tapes or analog tapes from your established library or make analog recordings from antenna or cable systems. To use the analog capability, check the Analog Connection box.

Figure 2. Name for 1394 Device screen

Figure 1. New 1394 Device screen

46

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Projection Television Owner’s Guide Risk of Electric Shock Contents Important Safeguards Important SAFEGUARDS, cont’d Our Thanks Mitsubishi Digital Electronics America, IncChapter Television OverviewTV Accessories Special FeaturesPOWER/TIMER Indicator Front Control PanelDigital Audio Output Back PanelIEEE-1394 Input/Output CableCARD SlotDVI Analog Audio IR Output-NetCommandHdmi or DVI Devices Component InputsNews and stock-market report bars Letterbox top/bottom black barsSide bar images Shopping channel logos & pricing displaysConnecting Connecting External Devices & NetCommand Setup ChartConnecting a Wall Outlet Cable or Cable Box Cable Box compatible with PIP/POPFor antennas with twin flat lead Single AntennaSeparate UHF and VHF Antennas For antennas with coaxial leadVCR to Antenna or Wall Outlet Cable RedConnecting VCR Video and Audio to a Cable Box VCR to a Cable BoxReceiver or Stereo System Satellite Receiver or Other Device with S-VideoDVD Player with Component Video Connecting a DVD Player with Component Video or DVI DeviceDVI Device Hdmi Device External DTV Receiver with Component VideoConnecting the IR Emitter NetCommand IR Emitter NetCommandConnecting Ieee 1394 Devices Pin Style vs -Pin StyleDirect Device-To-Device Style Ieee 1394 Device Connection StylesConnection Styles Hub Connection StyleCableCARD Definition and Initial Screen Display Using a CableCARDCableCARD Technology Connecting Helpful Hints NetCommand Setup and Editing NetCommand Pre-Memorized Devices DeviceRemote Control Functions Overview FollowingOperation Remote Control FunctionsOperation, Care, Sleep TimerSleep Timer CareNetCommand On-Screen Buttons Remote Control Buttons 3D Graphical Menu SystemDevice Setup Screen NetCommand Initial SetupNetCommand Information Screen Welcome ScreenReview Screen Finish ScreenReceiver Screen Edit NetCommand, Adding an A/V ReceiverReceiver Inputs Receiver Input Learn Screen Receiver Learn ScreenName Screen Monitor Out to AVR ScreenEdit NetCommand, Adding Devices Edit NetCommandAdd Screen Device ScreenDevice Learn Screen Device Advanced Learn ScreenRF Connection for Cable Screen Connection for Device ScreenVCR for Recordings Screen IR Code for Device ScreenChange Screen Delete ScreenDevice Selection Menu IR Controlled Devices/IEEE 1394 Menus Using the Device Menu Button to Display MenusDevice Menu CableCARD MenuIeee 1394 Devices and NetCommand Controlled Recordings New 1394 Device Screen Adding Ieee 1394 Devices AutomaticallyAdding Ieee 1394 Devices Automatically Name for 1394 Device ScreenIeee 1394 Device Type Screen Connection ScreenDigital Control Signal Digital Video SignalsDigital Audio Signals Ieee 1394 Devices CompatibilityUsing the Guide Button to Display ChannelView and Menus Time-Delayed Recording NetCommand Controlled RecordingsRecord To Setup Recording NowDisc Search Cancel Current RecordingsRecord List Screen Track List ScreenDirect VCR Recording from an Antenna or Cable Source Direct VCR RecordingRestrictions for Traditional VCRs Setting up a Peer-to-Peer Connection NetCommand Controlled Peer-to-Peer ConnectionsWhat is a Peer-to-Peer Connection? Canceling a Current Peer-to-Peer ConnectionImportant Notes TV Menu Screen Operations Main Menu Choices Setup Menu Reset Factory Defaults Menu Advanced ConvergenceNetCommand Menu Antenna Menu SQV SuperQuickView Time Menu Setting the ClockTimer On/Off ManualAnalog Captions Captions MenuCaptions Menu Digital CaptionsColor FontsSize Opacity FontEntry Chip Lock MenuChip Chip Start Time and V-Chip Stop TimeContent Categories Chip Signal InformationTV Ratings Lock By Time Front Button LockAudioVideo Menu AudioVideoAnalog Only Audio Settings Setting DescriptionsAnalog and Digital Audio Setting Digital Only Audio SettingsVideo Settings ContrastChapter Format Definitions Format SignalsDisplay Formats DVD DefinitionsOriginal Signal Operation of PIP and POP Changing PIP/POP DeviceDevice Menu with Net Command Ieee 1394 Devices Digital Bypassing the V-Chip Lock Appendix a Bypassing the V-Chip LockBypassing Front Button Lock This page intentionally blank Appendix B High Definition Input Connection Compatibility Input Levels and Timing with Component Video SignalsComponent-1 and Component-2 Inputs Appendix CRemote Control Programming Codes Programming the Remote to Control NetCommand A/V ProductsAppendix C Remote Control Programming Codes DVD PlayersMitsubishi A/V Receivers Cable Boxes and Satellite ReceiversReceivers Mitsubishi CD Players Not all functions for all modelsAppendix D On Screen Information Displays Appendix E NetCommand Specialized Device Keys Checkbox NameAppendix F Cleaning and Service For the WS-55515, WS-65515 and WS-65515A Appendix G Diamond Shield Removal for ModelsFor the WS-48515 For additional assistance, call 800For the WS-55615, WS-55615A, WS-65615 and WS-65615A Appendix G, Diamond Shield Installation for Model WS-73615 Appendix H Cabinet Separation for Models WS-65515, WS-65515A, WS-65615, WS-65615A, WS-73615Troubleshooting Problem Possible SolutionTroubleshooting Troubleshooting Using The System Reset Button Demo Mode Additional InformationIndex Menu 56 Mitsubishi Projection TV Limited Warranty Mitsubishi Projection Television Limited WarrantyMitsubishi TV Software Page Mitsubishi Digital Electronics America, Inc D405A10

WS-48515, WS-55615A, WS-55615, WS-73615, WS-65515A specifications

The Mitsubishi Electronics WS series of rear-projection televisions, specifically models WS-65615, WS-65515, WS-65615A, WS-55515, and WS-65515A, represent a significant era in home entertainment technology. Known for their innovative features and exceptional image quality, these models were well-regarded for both functional performance and design.

One of the most notable characteristics of the WS series is their use of DLP (Digital Light Processing) technology. This allows for sharper images and more vibrant colors compared to traditional CRT televisions. DLP technology also reduces issues like pixelation, offering a smoother image overall. The WS-65615 and WS-65615A feature a large 65-inch screen, delivering an immersive viewing experience perfect for movie nights and gaming. Meanwhile, the WS-65515 and WS-65515A provide a slightly smaller 55-inch display, which still offers remarkable visuals without taking up as much space.

All models are equipped with a High-Definition Multimedia Interface (HDMI) input, ensuring compatibility with modern devices like Blu-ray players, gaming consoles, and streaming devices. This connectivity is crucial for those looking to enhance their entertainment systems with the latest technology. Additionally, the WS series supports various audio-video formats, giving users flexibility in how they enjoy their content.

Another key feature is the incorporation of a 3D-ready capability, making these TVs future-proof for a time when 3D content was gaining traction. This aspect attracted cinema enthusiasts who wanted to bring an enhanced experience home. The models also include a built-in digital tuner, allowing users to access over-the-air broadcasts without needing an external box.

The WS-65615 and WS-65515 models additionally boast a stylish and slim design that fits well within modern living spaces, combining aesthetics with functionality. Their lightweight construction allows for easier installation and setup.

Overall, the Mitsubishi Electronics WS-65615, WS-65515, WS-65615A, WS-55515, and WS-65515A televisions deliver a compelling mix of advanced technologies, user-friendly features, and stunning visuals. While they may be considered legacy models today, they still exemplify the quality and innovation Mitsubishi Electronics strived for in enhancing the home viewing experience.
Top Page Image Contents