One for All URC-7721 instruction manual Trouble Shooting, Problem & Solution, Problem Solution

Trouble Shooting

Problem & Solution

Problem:	Solution:
Your brand is not listed	Try the search method on page 7.
in the code section?
The ONE FOR ALL 2 does	A) Try all the codes listed for
not operate your	your brand.
device(s)?	B) Try the search method on
	page 7.
The ONE FOR ALL 2 is not	You may be using the wrong
performing commands	code. Try repeating the Direct
properly?	Set-Up using another code listed
	under your brand or start the
	search method over again to
	locate the proper code.
Problems changing	Enter the program number
channels?	exactly as you would on your
	original remote.
DVD-R not recording?	As a safety feature on your ONE
	FOR ALL 2, you must press the
	Record key twice.
The ONE FOR ALL 2 does	Make sure you are using new
not respond after	batteries and are aiming the ONE
pressing a key?	FOR ALL 2 at your device.
The red light (LED) does	Replace batteries with 2 fresh,
not blink when you press	new “AA/LR6” alkaline batteries.
a key?

WWW.ONEFORALL.COM 11