One for All URC-7721 instruction manual Setting up the ONE for ALL, Direct code set-up

Setting up the ONE FOR ALL 2

(How to set-up the ONE FOR ALL 2 to control your devices)

Direct code set-up

Example: To set up the ONE FOR ALL 2 for your television:

1.

2.

3.

4.

5.

6.

Make sure your device (television) you wish to operate is switched on (not in standby).

	ON	OR				Find the code for your device in the Code List
	EF
	0009				,041
		0093,		0363		(page 103 - 113). The device codes are listed per
Admi	7,
	0264
a	008	0216
Acur ral	0217,
Adyson	0516				0037,
Agazi	0087					device type and brand name. Also the most popular
B		,0009,			1
Aiko	0361,0208,
AG	0216		0274
Agef	0037,				037
						code for each brand is listed first. If your brand is not
						listed at all, try the Search Method on page 7.
						Press the device mode key (TV) on the ONE FOR
						ALL 2 remote for the device you wish to set up.
						Press and hold down MAGIC until the red light
						blinks twice (the red light will blink once then twice).
_ _ _ _						Enter your four-digit device code using the num-
						ber keys. The red light will blink twice.
						Now aim the ONE FOR ALL 2 remote at your
						device (television) and press POWER. If your
						device switched off, the ONE FOR ALL 2 is ready to
						operate your device.

-Most TV’s do not switch back on pressing the POWER key, please try pressing a “number” key or the “TV-text off” key to switch your TV back on.

-If your device does not respond, follow steps 1 through 6 with each code listed for your brand. If none of the codes listed for your brand operate your device, then try the Search Method described on page 7, even if your brand is not listed at all.

-Some codes are quite similar. If your device does not respond or is not functioning properly with one of the codes, try another code listed under your brand.

-If the original remote control from your DVD Player/DVD-R did not have a POWER key, press PLAY instead of POWER during step 6.

-To set up your other devices, follow the same instructions above, only press the appropriate device key during step 3.

-Remember to press the correct device key before operating your device. Only one device can be assigned to a device key.

-Write your device code in the applicable four digit boxes provided in the battery compartment and on page 8 for future reference.

Devices can be found under the following keys:

Television DVD DVD Player/DVD-R

To set up for a second TV or DVD (See mode re-assignment, Page 9).

6 WWW.ONEFORALL.COM