JVC AV-61S902 manual Video Connection

AV-61S902(E) 1/12/01 3:15 PM Page 13

Connections

INPUT

A

SPLIT

OUT

INPUT

B

75Ω

IN

Diagram #2

VCR

Yellow

White

( VHF / UHF )

S-VIDEO

	OVER	OVER	OVER
VIDEO
L
AUDIO	MONO	MONO	MONO
R
	INPUT 3	INPUT 2	INPUT 1

Red

1)Connect a coaxial cable out from the cable TV wall outlet or external antenna into the RF Input A.

2)Connect a coaxial cable out from the Cable Split Out RF jack into the RF input on the VCR.

3)Connect the yellow video cable from the VCR’s Video Output jack to the TV’s Video Input 1 jack.

4)Connect the white audio cable from the VCR’s Left Audio Output jack to the TV’s Left Audio Input 1 jack.

5)Connect the red audio cable from the VCR’s Right Audio Output jack to the TV’s Right Audio Input 1 jack.

•If you are connecting a mono sound VCR it will have only one audio out jack. Connect it to the TV’s left audio input jack.

•The VCR signal will be available on Input 1 on the Input Menu (see page 54) if the connection shown above is used.

•Coaxial cables are not included with the television.

•Please consult your VCR’s owners manual for more information on its operation.

S-Video Connection

You may also choose to connect video devices (VCR, Camcorders, etc) by using an S-Video Cable. S-Video may be substituted in any of the connections diagrams included here. To use S-Video:

1) Plug an S-Video cable out from the video device and in to the TV’s S-Video Input.

Keep the audio connections the same as shown in the diagrams. Make sure that the S-Video cable and audio cables are plugged into the same input (for example, S-Video and audio cables into the Input 1 set of jacks).

13