Remote Control
Install the Batteries
•Before you can operate the remote control, you must first install the batteries (included). Push down on the remote’s back cover and slide towards the bottom to remove it.
Insert two AA batteries (supplied), carefully noting the “+” and
When batteries are installed, slide the cover back into place (until it clicks into position).
•If the remote control acts erratically, replace the batteries. Typical battery life is six months to one year. We recommend using alkaline batteries for longer battery life.
When you change the batteries, try to complete the task within three minutes. If you take longer than three minutes, the remote control codes for your VCR, DVD, and/or Cable Box may have to be reset (pages
TV CATV VCR DVD ASPECT POWER
SPLIT
FREEZE SWAP
NATURAL CINEMA | 1 | 2 | 3 |
INPUT | 4 | 5 | 6 |
DISPLAY | 7 | 8 | 9 |
SLEEP TIMER 100+ | 0 RETURN+ | ||
BBE VIDEO STATUS SOUND | LIGHT | ||
|
|
| |
MUTING | + | V CHIP | |
|
|
| |
| CH |
|
|
VOL |
| VOL |
|
|
| + |
|
| CH |
|
|
MENU |
|
| EXIT |
VCR CHANNEL VCR /DVD | TV/VCR | ||
PREV NEXT | POWER | ||
REW | PLAY |
| FF |
REC | STOP | PAUSE | |
OPEN/CLOSE |
| STILL/PAUSE | |
Remote Control Basics
-Press the POWER button to turn the television on or off.
-Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if you need to operate a cable box.
-Slide the VCR/DVD selector switch to VCR to control a VCR, slide to DVD to control a DVD player. Please see pages 22 to 25 for instructions on programming your remote control to operate a Cable box, VCR or DVD player.
-Press the CH+ and CH– buttons to scan through the channels. Tap the CH+ or CH- button to move through the channels one channel at a time.
-To move rapidly through the channels using JVC’s Hyperscan feature, press and hold CH+ or
-Press VOL+ or VOL - to raise or lower the volume. An indicator bar will appear onscreen to show you the television volume level.
-The CH+/– and VOL+/– buttons are also used to navigate JVC’s onscreen menu sys- tem.
-You can directly access specific channels using the
-For more information on remote control button features, see pages 50 to 55. For infor- mation on using the onscreen menus, see page 26.
TV
21