JVC AV-61S902 manual AV Compu-Link

AV-61S902(E) 1/12/01 3:15 PM Page 18

Connections

AV Compu-Link

JVC’s AV Compu Link feature makes playing video tapes totally automatic. Simply insert a pre-recorded tape* into your JVC-brand VCR and the VCR will automatically turn on and begin playback. At the same time, using the AV Compu Link, the VCR sends a signal to the television telling it to turn on and switch to the proper video input to watch a video tape.

•The AV Compu Link cable may be included with the JVC AV Compu Link accessory you wish to connect. If it is not, contact an authorized JVC Service Center for part # EWP 805-012.

•AV Compu Link can only be used with JVC-brand products.

S-VIDEO

	OVER	OVER	OVER
VIDEO
L
AUDIO	MONO	MONO	MONO
R
	INPUT 3	INPUT 2	INPUT 1

AV COMPULINK EX

IN

IN

VCR

AV

Compu

Link EX

Swap

To Connect: Plug one end of the AV Compu Link cable into the AV Compu Link input on your VCR or other Compu Link device. Plug the other end of the AV Compu Link cable into the AV Compu Link input at the rear of the television.

Notes:

*In order for the VCR playback to begin automatically, the recording tabs must be removed from the VHS tape. If the tab is in place, automatic switching will occur when you push the VCR’s PLAY button.

•The AV Compu Link cable has a male 3.5 mm (mono) plug on each end.

•When the television is in cool down mode, it will not accept signals from an AV Compu Link device.

•If your JVC-brand VCR has “A Code/B Code Remote Control Switching” (see your VCR’s instruction book), using VCR A Code will switch the TV to input 1. If you use Input 1 for video input from your cable box, use VCR B Code to select the TV Video Input 2.

•To connect a JVC HiFi receiver or amplifier for a completely automated home theater, see the HiFi’s connection instructions for detailed connection information.

•AV COMPU LINK EX is compatible with the following receivers: RX-664V, RX-665V, RX-668VBK, RX-774V, RX-778VBK, RX-884V, RX-888VBK, RX-1024V, RX-1028VBK, and later receiver models.

•The AV-61S902 can also receive Compu-Link signals from a DVD player. For details on operating a DVD player with AV Compu Link, please see your DVD player’s owners manual.

18