BenQ MP620p user manual Pro-Picture menu

2. Pro-Picture menu

Some picture adjustments are available only when certain input sources are in use. Unavailable adjustments are not shown on the screen.

FUNCTION
(default	DESCRIPTION
setting / value)
	Automatically resizes the input signal pixel resolution to the native
	resolution of the projector.
	On: The pixel resolution of the input signal is converted to the native
	resolution of the projector (1024 x 768). For input signals with lower
Auto Resize	resolutions, gaps in the pixels are automatically interpolated into the
	image before being projected. This may distort the image clarity.
(on)	Off: The image is projected as its original resolution, with no pixel
	conversion. For input signals with lower resolutions, the projected image
	will display smaller than if resized to full screen. You could adjust the
	zoom setting or move the projector towards the screen to increase the
	image size if necessary. You may also need to refocus the projector after
	making these adjustments.
	There are two aspect ratio settings.
Aspect Ratio	1. 4:3 (for a standard screen) 2. 16:9 (for a wide screen)
(4:3)		16:9 aspect ratio is only sourced through the Component Video input
		when being fed an appropriate 16:9 aspect signal. See "Connecting a
		Component Video source device" on page 18 and "Obtaining a
		preferred projected image size" on page 12 for details.
	Adjusts the horizontal position
H Position	of the projected image.
(0)
			-30		+30
	Adjusts the vertical position of
V Position	the projected image.
(0)
						+30
				-30
Phase	This function allows you to adjust the clock phase
(depends on	to reduce image distortion.
the selected
input source)
H Size (0)	Adjusts the horizontal width of the image.
Sharpness	Adjusts the image to make it look sharper or softer.
(15)

Operation 31