BenQ PE8700 Alignment Procedure, Equipment, OSD Default value used for color delay alignment

8.Alignment Procedure

1.DMD Bias Voltage Alignment

Equipment:

-None

Procedure:

1.Watch DMD chip Label

2.Switch the DIP switch on DMD board according to the character on the DMD chip

	B	C	D	E
1 of SW H1	1	0	1	0
2 of SW H2	1	1	0	0

0: Left; 1:Right

2.Color Wheel Delay Alignment Equipment:

-Battery Biased Silicon PIN Detector

-Oscilloscope

-Probe

OSD Default value used for color delay alignment

Item	Value	Item	Value
USER>DVI-A>		Factory>DLP>
Brightness	0	Brightness	0
Contrast	30	Contrast	49
Color	60	CW delay	20
Tint	15	User>Setup>Whit
Sharpness	0	Red Gamma	66
Filter	2	Green Gamma	66
Color Temp	0	Blue Gamma	66
		R gain	512
		G gain	512
		B gain	512
		R Offset	0
		G Offset	0
		B Offset	0

The default values let optical engine to get maximum contrast and brightness.

28