10. Factory OSD Operation
There are 10 pages in this OSD, the ways to enter factory OSD are open user OSD, then press power on button. If you have to return user OSD, open factory OSD and press power on button again.
Go to \User OSD\Environment\lamp hours\minutes, then press Right, Left, Right, Left, Enter in a row to switch to factory OSD.
1.Factory
This page is mostly for our factory to use.
Page | Items | Comment | |
| Return User OSD | Quit Factory OSD and return user OSD | |
|
|
| |
| Save Settings | Save current settings of factory OSD to EEPROM | |
|
|
| |
| Load Saved Settings | Load previous saved settings from EEPROM | |
|
|
| |
| Load Factory Default | Load factory default | |
|
|
| |
| Load All User Default | Restore all settings of user | |
| OSD and PC/HD timing parameters | ||
|
| ||
|
|
| |
Factory | Burn In Mode | ||
|
| ||
Burn In Timer Setup hours | Set | ||
| |||
|
|
| |
| Burn In Timer Running hours & | Running hours of | |
| minutes | ||
|
| ||
|
|
| |
| RS232 Baudrate | Set baudrate of RS2329600 or 115200 | |
|
|
| |
| OSD Timer | OSD automatic off time | |
|
|
| |
| Usage Hour | Record total usage hours of this projector | |
|
|
| |
| Software version | Software version | |
|
|
|
49