Sony MDS-JE530 manual Playing a Specific Track, 24GB, Playing an MD, Locating a track with AMS

Playing an MD

zYou can adjust the analog signal level output to the LINE (ANALOG) OUT jacks and the PHONES jack

1 While the deck is playing, press LEVEL/DISPLAY/CHAR (or DISPLAY) repeatedly until the line output adjustment display appears.

2 Turn AMS (or press LEVEL +/– repeatedly) to adjust the output signal level.

zYou can use Setup Menu to adjust the analog output level

While the deck is playing, select “Aout” in Setup Menu.

Note

When you eject the MD or turn off the deck, the output level is reset to the factory setting (0.0 dB).

Playing MDs

Playing a Specific Track

While the deck is playing or stopped, use the procedure below to quickly play any track.

` / 1

A

Number buttons

AMS

>10

X . >

H H X

z x

./> . >

m M

H

Locating a track with AMS*

To go to	Do the following:
The next or a succeeding	Turn AMS clockwise (or press
track during play	> repeatedly).
A preceding track during	Turn AMS counterclockwise (or
play	press . repeatedly).
The beginning of the current	Turn AMS counterclockwise (or
track during play	press . once).
A specific track while the	Turn AMS (or press ./>
deck is stopped	repeatedly) until the track
	number you want to go to flashes
	in the display, then press AMS or
	H.

*Automatic Music Sensor

zTo locate the last track of the MD quickly

While the deck is stopped, turn AMS counterclockwise (or press

. once).

zIf you locate a track while the deck is stopped or paused

The deck will still be stopped or paused at the beginning of the located track.

24GB