Undoing the Last Edit
You can undo the last edit operation and restore the contents of the MD to the condition that existed before the operation. Note, however, that you can’t undo an edit operation if you perform any of the following operations after the edit:
•Press REC z on the deck.
•Press z or MUSIC SYNC on the remote.
•Turn off the deck or eject the MD.
•Disconnect the mains lead.
MENU/NO AMS YES
1While the deck is stopped and no track number appears in the display, press MENU/NO.
“Edit Menu” appears in the display.
2Turn AMS (or press ./> repeatedly) until “Undo ?” appears.
“Undo ?” doesn’t appear if no editing has been done.
3Press AMS or YES.
One of the following messages appears depending on the last edit operation.
Last edit operation | Message |
Erasing a track |
|
|
|
Erasing all the tracks on an MD | Erase Undo? |
|
|
Erasing a portion of a track |
|
|
|
Dividing a track | Divide Undo? |
|
|
Combining tracks | CombineUndo? |
|
|
Moving a track | Move Undo? |
|
|
Naming a track or MD |
|
|
|
Copying a track or disc name |
|
|
|
Renaming a track or MD | Name Undo? |
|
|
Erasing a track or disc name |
|
|
|
Erasing all the names on the MD |
|
|
|
4Press AMS or YES.
“Complete!!” appears for a few seconds and the MD is restored to the condition that existed before the edit operation.
To cancel the operation
Press MENU/NO or x.
Editing Recorded MDs