Naming a track or MD using the remote Z
1Press NAME while the deck is in one of the operating statuses listed below, depending on what you want to name:
To name | Press while the deck is |
|
|
A track | Playing, paused, recording, or stopped with |
| the track number displayed |
|
|
The MD | Stopped with no track number displayed |
|
|
A flashing cursor appears in the display.
2Press CHAR repeatedly to select the character type.
To select | Press repeatedly until |
|
|
Uppercase letters | “AB” appears in the display |
|
|
Lowercase letters | “ab” appears in the display |
|
|
Numbers | “12” appears in the display |
|
|
3Enter a character.
If you’ve selected uppercase or lowercase letters
1Press the corresponding letter/number button repeatedly until the character to be entered flashes.
Or, press the button once and press ./> repeatedly.
To select symbols, press . repeatedly while “A” is flashing.
2Press M.
The flashing character is entered and lights continuously and the cursor shifts to the right.
If you’ve selected numbers
Press the corresponding number button.
The number is entered and the cursor shifts to the right.
4Repeat steps 2 and 3 to enter the rest of the name.
To change a character
Press m/M repeatedly until the character to be changed flashes, press CLEAR to erase the character, then repeat steps 2 and 3.
5Press NAME.
The whole name appears in the display.
To cancel the operation
Press MENU/NO or x.
zYou can undo the naming of a track or MD
For details, see “Undoing the Last Edit” on page 39.
Copying a track or disc name
You can copy an existing track or disc name and use it to name another track on the same disc or the disc itself.
1While the deck is stopped, playing, or paused, press MENU/NO.
“Edit Menu” appears in the display.
2Turn AMS (or press ./> repeatedly) until “Name ?” appears, then press AMS or YES.
3Turn AMS (or press ./> repeatedly) until “Nm Copy ?” appears, then press AMS or YES.
4Turn AMS (or press ./> repeatedly) until the number of the track (when copying the track name) or “Disc” (when copying the disc name) flashes, then press AMS or YES to copy the selected name.
When “No Name” appears in the display
The selected track or disc has no name.
5Turn AMS (or press ./> repeatedly) until the number of the track (when naming a track) or “Disc” (when naming a disc) flashes, then press AMS or YES to enter the copied name.
“Complete!!” appears for a few seconds and the name is copied.
To cancel the operation
Press MENU/NO or x.
Editing Recorded MDs