1.2 Rear panel
Y
EN
Q W E R T U I
1 5V (*): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 RF Out (*): . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 RF In (*): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 TV (*): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 VCR/DVD (*): . . . . . . . . . . . . . . . . . . . . . . .
6 
(*): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Socket used to connect the power cord.
RF output used to connect your receiver to a VCR/TV set to watch analogue channels only, or to connect another receiver.
RF input used to connect the antenna cord from the wall socket. Refer to chapter Connecting your
SCART(1) socket used to connect your TV set.
SCART(1) socket used to connect your video recorder or DVD player/recorder.
Digital audio cinch output used to connect your HiFi/audio receiver system.
7 IR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Not active on this receiver system.
8 L/R 
(*): . . . . . . . . . . . . . . . . . . . . . . . . . . . Left/Right analogue audio cinch outputs used to connect your HiFi/audio receiver system.
The label showing the type and serial number is underneath the receiver.
(1)SCART is also called Euroconnector or Peritel.
* Safety Extra Low Voltage
Note: if you consider using a video projector, refer to its user manual for the best video format to feed it. If necessary, refer to paragraph System Settings to properly set the TV/VCR SCART output.
57