Philips DCR 2021 user manual Display, Dolby Digital, Wake-up channel

Page 28

9.5 Display

This screen is used to set the TV output signal parameters.

1Select values for the following:

•TV Screen Format: select 4: 3 or 16: 9 depending on your TV screen format

•Display Format: Letter Box, Centre cut-out, or

Auto	EN
• TV SCART Output: default setting is RGB. Do	EN
not modify it unless your TV does not support
RGB.
• AV Control: for proper operation, it is
recommended to keep this setting to ON.
2 Press EXIT to exit the screen.

9.6 Dolby Digital

This screen is used to enable/disable automatic selection of Dolby Digital sound.

When Dolby Digital is disabled, you can still get stereo sound in digital format (PCM).

9.7 Wake-up channel

This screen is used to set the channel to be tuned at the receiver wake-up. Default setting is channel 200.

Image 28

Contents Benutzerhandbuch Foreword Dear CustomerQuick installation Press OK to start scanning for channels Meaning of symbols Safety instructions For future referenceContents Timer Manager SettingsAdvanced settings Restoring factory settingsProduct description Front panelRear panel Inserting your Smart Card Insert the smartcard with the golden chip facing upRemote control RED, GREEN,YELLOW BlueConnecting your Digital-receiver Connecting to a TV and VCR both fitted with Scart socketsConnecting to your audio equipment analogue or digital Analogue Connection aConnecting of a video projector to watch digital TV First installation First installation settingsChannel scan Set your TV display formatSearch failure Before starting a new scanUsing Low Power mode Your cable receiver is in standby modeDay-to-day operation Digital radioUsing number keys Using P+/P- keysUsing channel lists PIN codeVolume control / + BannerTo modify your PIN code, refer to paragraph PIN-Code Change To close the banner, press Info a third timeCurrent programme options While watching digital TV or listening to digital radioRecording timers Set a timer from the EPGSetting a timer via the Timer Manager Deleting an active timerSwitching to analogue TV Premiere features Premiere Multifeed Menu Tree Menu treeChanging settings Cancelling/storing changesMenu navigation BasicsPremiere Service Menu PIN-Code ChangeSmartcard SystemDolby Digital DisplayWake-up channel Setting your receiver Timer ManagerTo delete an existing timer To set a new timer or edit an existing timerList Organization Channel ManagerMonday to Friday , or Monday to Saturday List Editing Scroll to the channel you want to move using the ty keysChannel List Main TV, which is the only editable list Channel Pool SettingsDisplay options To enable Parental Lock To modify your receiver passwordMust not be used as a password For ParentsAdvanced settings TV SettingsSystem Settings Enter your new password again to confirm Press ExitTime Settings Factory settingsYou can also access this screen via the Premiere menu Decoder StatusYour receiver later, and then press OK to confirm Channel SearchSoon as you set your receiver to standby Other settings Restoring factory settingsChanging the remote control configuration 11.3 VCR/DVD Recorder ControlEXT Digital-Receiver and VCR or DVD settings Recording with the VCR/DVD Recorder Control featurePage Troubleshooting Problem Possible cause ActionChange the TV Scart Output Technical specifications Video decoding3111 176

9.5 Display

RGB.

9.6 Dolby Digital

9.7 Wake-up channel