Mitsubishi Electronics XL50, XL21 Cube installation, Safety precaution, Preparation

1.2. Cube installation

1.2.1.Safety precaution

•This product requires a special installation to prevent falling or toppling. This should be done by installation specialists.

•Be sure to read this manual and the user’s manual for your safety before starting assembly or installation.

•Be sure to use supplied accessories for assembly or installation.

•Attach all the screws and fixtures specified in this manual securely.

•Reinforce the wall surface and floor so that it can support the total weights of the products for a long time and resist earthquakes, possible vibrations, and external forces.

•Ensure that the safety factor is more than 10 (or ensure that the total bolts can bear ten times the weight of products and the brackets).

•Do not use the product near a heater or in a humid, dusty or smoky location.

•Unless otherwise specified, do not install the product with its intakes, exhaust slots and ventilation holes blocked. The unit may overheat and cause a fire or breakdown.

•Be sure that a lighting or sunlight does not leak into the screens.

•Inspect the mounting fixings more than once in a year as needed.

1.2.2.Preparation

•Before installation, remove the desiccant(s) taped on the top of the product.

•Make sure that all of the following are supplied.

	Supplied accessories (per unit)																			Q’ty					Necessary tools
1.	Hexagon socket head bolt (M6)																			8				1.	Allen wrench
2.	Flat washer (for M6)																	8							2mm, 2.5mm, 4mm, 5mm
3.	Spring washer (for M6)																	8						2.	Phillips screwdriver #0, #2
4.	Joint hole seal																	1						3.	Level
5.	Power cord (1.8m) for North America and Europe																	2						4.	Stepladder
	(in VS-50XL20U and VS-67XL20U)																							5.	Spacer (for suitable screen
6.	Control cable																	1						6.	gaps)
7.	User’s manual																	1							Wrench (for base stand level
																									adjuster)
																				6 (	50”		),
8.	Plastic cable tie (for						Front				)
														10 (	67”		)
						Optional products																			Others
1.	Wireless/wired remote control: R-XL50TX																							1.	Base stand
2.	RGB input board:																							2.	Base stand level adjuster
	VC-B50KA (for	PH50						,	XL50			), VC-B20KA (for				PH50			,	XL21		)		3.	Base stand level adjuster
																									fixing metal part
3.	Video input board:
																								4.	Wall fixing metal part
	VC-B50KV (for	PH50						,	XL50			), VC-B20KV (for				PH50			,	XL21		)
																								5.	Anchor bolt
4.	Power cord (3m):
																								6.	Hexagon socket head cap
	JC-PC3MA (for North America)
																									screw (M6)
	JC-PC3ME (for Europe)
	JC-PC3MC (for China)
5.	External AC fan (for						50”			Single			Front	):
	JC-AF115R (for						AC115V)
	JC-AF230R (for AC230V)
6.	Motorized adjustment tool: S-AXL50E
7.	Spare lamp:
	S-PH50LA (for			Changer							)
	S-XL50LA (for		Single							)
8.	Spare color wheel:
	S-PH50CW (for					PH50				)
	S-XL50CW (for				XL50				), S-XL20CW (for						XL21		)

PH50, XL50, XL21 series Set-up and Installation Manual

6