Mitsubishi Electronics XL21, XL50 installation manual 107

4.4.2.2. Additional items (When ANALOG or S.ANALOG is selected)

With remote control				Wallaby menu	Page
H.TOTAL			“Sampling Number (H Total)” in “A/D Setting”		53, 61
FINE			“Sampling Phase (Fine)” in “A/D Setting”		53, 58
CLAMP START			“Pulse Position” in “Clamp Pulse” in “A/D Setting” window		54, 61
CLAMP WIDTH		“Pulse Width” in “Clamp Pulse” in “A/D Setting” window
MASK START			“Hold Start” in “PLL Hold (V-Mask)” in “A/D Setting” window		54, 61
MASK END			“Hold End” in “PLL Hold (V-Mask)” in “A/D Setting” window
SYNC SELECT			“Sync Select” in “A/D Setting” window		54, 62
CLOCK RANGE			“Sampling Frequency Range” in “A/D Setting” window		54, 62
AMP GAIN	AUTO GAIN	“Auto Adjust…” in “Amp Gain” in “A/D setting”			52, 59
	MANUAL GAIN		“Gain” and “Level” in “Amp Gain” in “A/D setting”
SIGNAL-TYPE		“Signal Type”			62

REV 2.4

107