Mitsubishi Electronics XL21, XL50 installation manual Misc Function

4.4.1.3. MISC FUNCTION

With remote control	Wallaby menu							Page
LAMP POWER	“Lamp Power”							37
LAMP MODE	“Lamp Mode”			(for		XL21	)	37
TERMINATE	“Analog Input” in “Termination”							37
S.TERMINATE	“S.Analog Input” in “Termination”							37
ADV.COL	“Advanced Color”							49
ADV.DARK	“Advanced Dark”							49
GAMMA	“Gamma Table Selection”							49
DITHER	“Dither”							49
3D Y/C	“3D Y/C Separation (NTSC)”							50
START MEMORY	“Start Memory”							38
OVERLAP	“Overlap”							38
OFFSET	“Offset” in “Overlap”							38
BAUD RATE	(N/A)							39
SYSTEM SYNC	“System Sync”							39
IMAGE FLIP	“Image Flip”							39
INDICATION	“Indication”							40
WHITE BOOST	“White Boost”							50
AUTO POWER ON	“Auto Power On”							41
BLOWOUT	“Blowout”							41
EXTENDED ID	(N/A)							41
CABLE LENGTH	“Cable Length”	(for	PH50	and		XL50	)	42
RESOLUTION	“Resolution”			(for	PH50		)	42

•The baud rate should be set with the remote control before RS-232 communication.

•The panel IDs can be set up to 64. If you set more than 33, the cube should be set that way in advance by the dipswitch and EXTENDED ID menu with the remote control.

REV 2.4

105