Mitsubishi Electronics XL50, XL21 installation manual Fixing to the wall and floor

1.2.5.3. Fixing to the wall and floor

You don’t have to attach the lower door in this chapter since picture outlines have yet to be adjusted as explained in the next chapter.

After the picture outline adjustment, attach the door in the reverse order of detaching.

1.Attach floor-fixing brackets on 4 level adjusters below the base stand and fix them to the floor with anchor bolts.

2.Fix the upper back part of the display wall to the back wall with wall-fixing brackets as shown in the following figure.

Wall-fixing brackets

Hexagon socket head cap screws (M6)

Anchor bolts

Adjusters Anchor bolts

Floor-fixing brackets

Caution

Make sure the whole set is assembled firmly and installed stably. To prevent the set from falling due to unpredictable events such as earthquakes and shocks, fix the set firmly to the wall and floor. Furthermore, carefully confirm the strength of the fixing area of the installation place (wall and floor). The wall and floor fixing method differs according to the number of assembled units.

PH50, XL50, XL21 series Set-up and Installation Manual

12