4. Select Find Now.
Selecting the time/date plays back the video. If search criteria was entered, the Playback Search Results screen appears as shown at right.
ITEM | VALUES | DEFAULT VALUE |
Devices to | Disk, Archive | Disk |
Search |
|
|
|
|
|
Date from | Date Value | Current Date* |
|
|
|
Date to | Date Value | Current Date |
|
|
|
Time from | Time Value | Current Time – |
|
| 1 minute* |
|
|
|
Time to | Time Value | Current Time |
|
|
|
Cameras | Cameras 1, 2, 3, and 4 | All Cameras |
|
|
|
Alarms | Motion, Dark, Vid Loss, | None Checked |
| Aux, |
|
|
|
|
Find Now | Search Results screen |
|
| is displayed |
|
|
|
|
Exit | Reverts to live video mode |
|
|
|
|
*TIP: Date From can be set to display the earliest video from the archive device. To do this, specify a date that is out of range (like the year 1999), then press Find Now.
5.Select the desired video for playback. At the completion of playback, the Playback Search Results screen is presented.
6.Select another video or exit search.
IMPORTANT NOTES:
•If searching a tape while in Continuous or Event Only archive mode, you must first acknowledge the message to take the tape device
•If in Event Only archive mode, searching tapes may take additional time due to the increased number of tape indices.
•When searching an archive tape, the tape indices are stored on the unit’s hard drive for faster retrieval.
•If the search screen is exited or the tape is ejected, its indices are purged from the system, so be sure that the current search is complete before exiting.
•While in playback mode, press STOP to revert to the previous Playback Search screen. Press STOP again to exit and return to live mode.
Playback Search Results Options:
•Play: The selected alarm video is played.
•Archive: The archive box is displayed (see Section 10).
■If Continuous Archive is set, Archive is disabled on this menu.
•New Search: Returns to the search screen. Current search parameters are stored as the default search criteria.
•Cancel: Removes the
•Exit: Exits the playback function.
26