Philips Digital Video Recorders Alarm Setup, Recording Setup, Motion Detector Setup

APPENDIX B – Hi-Q DEFAULTS

ITEM		FACTORY DEFAULT VALUE
Alarm Setup
	Auxiliary Alarms	All Disabled
	Auxiliary Alarm Input Polarity	All Normally Open
	Relay Output Polarity	All Normally Open
	Relay Output Enable	Disabled
	Relay Activation Dwell Time	5 seconds
	Relay Activation FOLLOWS Mode for	Disabled
	Contact Closure Alarms
	1-Touch Alarm	Enabled
	Dark Alarms	All Disabled
	Motion Detector Alarms	All Disabled
	Pre-alarm Recording Duration	30 Seconds
	Post-alarm Recording Duration	1 Minute for All Alarm Types
Recording Setup
	Video Recording	All Continuous
	Audio Recording	Disabled
	Estimated Recording Time	Calculated
	Image Quality	Highest Quality
	Time-lapse mode	Real Time
	Disk Full Behavior	Overwrite; (Stop Recording with disk array)
	Hard Drive: Data Redundancy	For DVRRT4EP Model Only: Striping
	Disk (1, 2) Status	Determined by System
	Total Disk Capacity	Calculated
	Archive Mode	Manual; (set to Stop Recording with disk array)
Motion Detector Setup
	Target Size	2 h x 2 v
	Motion Zones	All Grid Elements Active
	Sensitivity	70
	Suppression	Standard
	Motion Detector Direction	All (1)
	Target Speed	0– 40 seconds
Miscellaneous Setups
	Profile Name	Profile [Profile Number]
	Warning Beeper	Enabled
	Front Panel Password Protection	Disabled
	Language Selection	English
	Date/Time On-screen Display Format	24-hour Mode; Not Affected by Restoring Factory Defaults
	Activity Log Date/Time	Current Date/Current Time – 5 Minutes
	IP Address	10.10.0.0
	Subnet Mask	255.255.255.0
	Default Router	10.10.0.1
	Name of Hi-Q	Hi-Qxxxx
	Camera Titles	Camera n, where n is the camera number <1,2,3,4>
	Brightness (Manual Gain) Adjustment on	AUTO
	Video Inputs (MON A Only)
	Sequence Dwell Time - MON A & B	3 Seconds

35