Philips Digital Video Recorders installation instructions Quick Start Guide Initial POWER-UP

5 QUICK START GUIDE (INITIAL POWER-UP)

The default setting (Profile 1 only is in use) has all four channels recording high quality real time video. To change these settings, proceed to Programming the Hi-Q via the Menu (Section 7). Refer to Appendix B for all default settings.

1.Install the Hi-Q in a well ventilated location, ensuring that cooling vents are not blocked. Do not place the unit on top of other equipment unless rack mounted.

2.Connect camera(s).

3.Connect audio (optional; See Figure 3.2 for configuration).

NOTES:

•By default, audio recording is disabled to prevent unintentional audio recording that could violate legal restrictions. The administrator must enable the audio feature if desired.

•Audio recording occurs only if Channel 1 is recording video.

4.Attach a monitor to MON A for viewing Hi-Q configuration menus.

5.Locate the in-line surge protector packaged with the Hi-Q, and install it between the Hi-Q unit and the power cord (see installation example below).

6. Apply power and select language, date, and time (see below). Time must be entered in 24-hour format.

7. The Hi-Q will now autodetect PAL or NTSC cameras.

NOTE: You must use the Shut Down procedure to power down the Hi-Q (Section 7.9.1) or data may be lost.

13