HDMI-ARC Connection

HDMI-ARC allows you to use EasyLink to output TV Audio directly to a connected Audio device, without the need for an additional Digital Audio cable.

HDMI 3 IN only	OUT
HDMI cable	Digital home theater
	amplifier that supports
	HDMI-ARC

Note(s)

●The HDMI 3 connector is HDMI Audio Return Channel (ARC) compliant. Use it to output Digital Audio to an HDMI home theater system.

●Be sure that the device is HDMI CEC and ARC compliant and that the TV is connected to the device using an HDMI cable attached to HDMI-ARC connectors.

Component Analog Video Connection

Component Analog Video Connection offers Better Picture quality for Video Devices connected to the Unit.

If you connect to the Unit’s Component Video (Y/Pb/Pr) Input jacks, connect Analog Audio Cables to the Analog Audio (L/R) Input jacks.

14 .English

Composite Analog Video Connection

Composite Analog Video Connection offers standard Picture quality for Video Devices connected to the Unit.

If you connect to the Unit’s Component/Composite Video (Y/VIDEO) Input jack (green), connect Audio Cables to the Audio (L/R) Input jacks. When the Audio is monaural, then only connect to the Audio L Input jack.

OUT

DVD Player

Audio (L/R) + Video cables

Note(s)

●With this Unit, yellow cable must be connected to Y (green) jack on the Component Video Input jacks.

●Whenever you connect to the Composite Video Input jack (Y/VIDEO), you must disconnect the Component Video Input jacks (Pb and Pr). If you leave those jacks connected, it may cause of an unstable picture.

Connecting the TV to the Internet using an Ethernet cable

	OUT
	Set-top Box
Component (Y/Pb/Pr)	or
Video cables
IN	OUT
	OUT
IN	Blu-ray Disc/DVD
	Recorder
Audio (L/R) cables

Note(s)

●The Unit accepts 480i / 480p / 720p and 1080i of Video signals for this Connection.

Ethernet cable

Note(s)

Internet

LAN

Network provisioning

equipment

●Please purchase shielded Ethernet cables at your local store and use them when you connect to network equipment.

●After connecting an Ethernet cable, set up necessary network settings. Network L p. 37

●Do not insert any cable other than an Ethernet cable to the Ethernet port to avoid damaging the unit.

●If your telecommunications equipment (modem, etc.) does not have broadband router functions, connect a broadband router.

●If your telecommunications equipment (modem, etc.) has broadband router functions but there is no vacant port, use a hub.

●For a broadband router, use a router which supports 10BASE-T / 100BASE-TX.

●Do not connect your PC directly to the Ethernet port of this unit.

Continued on next page.