Philips 58PFL4609, 58PFL4909 user manual Hdtv

					to Turn Off image
				PC	enhancement features
					which makes the TV to
Mode selection					act purely as a monitor
						to enable image
			HDTV			enhancement features
						to improve picture
						quality
Auto adjustment		to adjust the horizontal / vertical position, clock
		and phase of the PC screen automatically
			J	Cursor		Cursor	K
Clock	to decrease setting				to increase setting
Phase	value				value
Horizontal	to move PC screen left				to move PC screen
position					right
Vertical position	to move PC screen				to move PC screen up
	down

You can set a Particular Picture Quality using Advanced settings.

Auto picture	Color alignment	Mode
Backlight	Noise reduction	Auto
Contrast	Light sensor	On
Brightness	Black stretch	Medium
Color	Dynamic contrast	Maximum
Tint	Gamma
Sharpness	120 PMR	Off

Advanced settings MPEG artifact reduction Medium

		to set the color temperature to Personal,
	Mode	Cool, Normal and Warm.
		When you adjust the following settings,
		Personal will be set automatically.
		J	Cursor		Cursor	K
	Red gain	to Decrease Red		to Increase Red
		Contrast		Contrast
Color	Green gain	to Decrease Green		to Increase Green
		Contrast		Contrast
alignment
	Blue gain	to Decrease Blue		to Increase Blue
		Contrast		Contrast
	Red offset	to Decrease Red		to Increase Red
		Brightness		Brightness
	Green	to Decrease Green			to Increase Green
	offset	Brightness			Brightness
	Blue offset	to Decrease Blue			to Increase Blue
		Brightness			Brightness
Noise	to select the desired setting, then press OK
reduction	(Off, Minimum, Medium, Maximum and Auto)
	Off	to set Light sensor to Off
Light		to adjust backlight for the best picture
sensor	On	quality by dynamically adjusting the
		backlight intensity in accordance with
		lighting condition in the room
Black	to select the desired setting, then press OK
stretch	(Off, Minimum, Medium and Maximum)
Dynamic	to select the desired setting, then press OK
contrast	(Off, Minimum, Medium and Maximum)

28 .English

Gamma		J	Cursor		Cursor	K
	to adjust the gamma encoding of images
120 PMR	Off		to set 120 PMR to Off
	On		to make the video appear smooth
MPEG	to select the desired setting, then press OK
artifact
	(Off, Minimum, Medium and Maximum)
reduction
Color	Off		to set color enhancement to Off
enhancement	On		to make colors more vivid and bright
	to select the desired setting, then press OK
	(Red, Yellow, Green, Cyan, Blue and Magenta)
			J	Cursor	Cursor	K
			to rotate only		to rotate only
					selected color tint
	Tint		selected color tint
Custom					in
			in clockwise
					counterclockwise
color			direction
management					direction
	Saturation		to decrease color		to increase color
			with only selected		with only selected
			color		color
	Brightness		to decrease		to increase
			brightness with		brightness with
			only selected color		only selected color
Film mode	Off		to set film mode to Off
	Auto		to optimize the picture recorded by the
			original film

Note(s)

●Mode selection is available only if

–the external Input modes are selected HDMI 1, HDMI 2 or HDMI 3.

–the connected HDMI device is outputting a video signal.

●Adjusts Backlight for the Best Picture Quality by Dynamically Adjusting the Backlight Intensity in accordance with the Room Lighting Condition when Light sensor is Set to On. Please ensure the Room Lighting is Stable and the Light Sensor is Not Blocked.