Philips 58PFL4909 Auto sound Personal, Equalizer Start now Sound Balance, DTS TruSurround Off

Sound

Before you begin:

You must set Home in Location. L p. 35

Otherwise, personalized Picture and Sound settings will not be memorized after the Unit goes into Standby Mode.

1Press Q (MENU) and use H I J K to select Setup then press OK.

2Use H I to select Sound, then press OK.

Settings assistant	Auto sound	Personal
Picture	Equalizer	Start now
Sound	Balance
Features	DTS TruSurround	Off
Installation	Auto volume leveling	Off
Software	TV speakers	On
	Headphone volume
	Digital output format	PCM

3Use H I J K to select the item you want to adjust, then press OK.

The following sound settings can be configured. Depending on the format of the broadcasting, some sound settings are not available.

	to select the desired Setting, then press OK.
	(Personal, Standard, Vivid, Sports, Movie, Music
Auto sound	and News)
	When you adjust the following settings
	(Equalizer, DTS TruSurround and Auto volume
	leveling), Personal sound will be set
	automatically.

Adjust the tonal quality for each frequency.

		J	Cursor	Cursor	K
Equalizer
		to select the specific frequency using H I, and
		use J K to Adjust the Level, then press OK.
Adjust the speakers to suit your listening preference.
		J	Cursor	Cursor	K
Balance
		Adjusts the balance of the right and left speakers
		to Best suit your listening position.
	Digital TV Operation

You can select the Audio language while your TV is receiving the Digital broadcasting.

Digital audio	to select the language according to your
	preference.
language
	(It differs depending on the program.)

Cable / NTSC (Analog) TV Operation

You can select Main or SAP while your TV is receiving the Analog broadcasting that has the SAP (Second Audio Program).

(It differs depending on the program.)

Alternate audio	Main	to output main-audio
	SAP	to output second-audio program

29 .English

Cable / NTSC (Analog) TV Operation

When you set to Main in Alternate audio above, you can select Mono or Stereo if the Analog broadcasting is sending the MTS (Multichannel television sound).

Mono/Stereo	Mono	to Output mono-audio.
	Stereo	to Output stereo-audio.

This selects sound modes for more spatial or surround sound reproduction.

DTS TruSurround	Off	to set DTS TruSurround™ to Off
	On	to set DTS TruSurround™ to On

This function keeps a constant loudness differential between the TV commercials and the programs.

	Off	to Remove the Auto volume
		leveling
Auto volume
		to Reduce Volume Differences
leveling	On
		between the TV Commercials and
		the Programs

You can select the Audio Output from the unit’s speakers or not. If your amplifier is HDMI link function compatible and connected by an HDMI cable to this unit, some sound operations such as volume up can be changed by using this unit’s remote control. Make sure Master EasyLink

is set to On. L p. 36

	Off		not to Output Sound from the
			Unit’s Speakers
	On		to Output Sound from the Unit’s
			Speakers
TV speakers
			to control Audio Output from
	Speakers		your connected EasyLink
			Compliant Devices with VOL + /
	EasyLink
			- by using this Unit's remote
			control.
Adjust headphone volume.
Headphone	J	Cursor		Cursor	K
volume	to decrease or increase volume
You can set the digital audio output format from SPDIF/ARC.
Digital output	PCM		to Output PCM format.
			to Output Audio in its native
format	Bitstream		format as Bitstream to connected
			Audio receiver.

If a channel or Input device is too loud or too soft, navigate to that channel or Input device.

	J	Cursor	Cursor	K
Delta volume	to set a negative delta		to set a positive delta
	volume level as per		volume level as per
	your personal		your personal
	preferences		preferences

Note(s)

●Alternate audio and Mono/Stereo are not available when you watching TV programs with a cable box or satellite set-top box connected through an HDMI cable or Component / Composite Video cables.