18 .English
9Use J K to select your preferred energy efficiency level, then press OK.
Select the energy efficiency level you prefer.
Personal | Energy saving |
10 Use J K to select your preferred sound setting, then press OK.
Select your preferred sound setting
Sound A | Sound B | Sound C |
11 Press OK to finish Settings assistant.
Store your preferences.
Cancel
Store
●Network updates will appear after Connection test succeeds. Use J K to select Yes, then press OK.
●When the initial setup is completed, the lowest memorized channel with the confirmation message will be displayed on the TV screen.
Note(s)
●If you are not receiving a signal from your Cable service, contact the Cable provider.
●If you press B during autoprogram, this setup of TV channels will be cancelled.
●The Initial Autoprogram function can be executed for either Antenna or Cable only once.
When you change the connection (Antenna / Cable), select Autoprogram again. L p. 34
After an Initial Setup is completed...
●
●
●
●
●
●
●
If you want to scan the channels Automatically again. Autoprogram L p. 34
You can add the desired channels not memorized by Autoprogram through antenna connection.
Weak channel installation L p. 34
If you want to change to another Language. Language L p. 33
If you want to change the country setting. Country L p. 47
If you want to change the Location setting. Location L p. 35
If you want to change the network setting. Network L p. 37
If you want to restore the picture and sound setting. Settings assistant L p. 27