Philips 58PFL4909, 58PFL4609 user manual Useful tips, Question Answer

49 .English

6 Useful tips

FAQ

Question

Answer

●

Check the Antenna or Cable Connection to the Main Unit.

●

Check the Batteries on the Remote Control.

●

Check if there is an obstacle between the infrared sensor window and the Remote Control.

My Remote Control does

●

Test the IR Signal Output use IR Signal Check. L p. 52

If okay, then possible Infrared Sensor trouble.

not work.

●

Aim the Remote Control directly at the infrared sensor window on the front of the Unit.

What should I do?

●

Reduce the distance to the Unit.

●

Re-insert the Batteries with their Polarities (+/–) as indicated.

●

When there is an infrared-equipped device such as PC near this Unit, it may interrupt the Remote Control signal on this

Unit. Move the infrared-equipped device away from this Unit, change the angle of the Device's infrared sensor or Turn

Off the infrared communication function.

How come the Initial Setup

appears every time I Turn

●

Make sure to complete the Initial Setup before the Unit goes into Standby mode.

On this Unit?

●

Autoprogram must be completed when you Set Up the Unit for the First time or Move it to a location where previously

unavailable channels are broadcast.

●

Make sure Autoprogram has been completed. L p. 34

Why can I not watch some

●

The selected channel may not be broadcasting.

●

When Autoprogram is interrupted and not completed, some channels will not be received. Make sure to complete the

RF signal TV Programs?

Autoprogram. L p. 34

●

The selected channel cannot be viewed by the Child and Ratings Lock setting. L p. 31

●

The Unit requires some kind of Antenna Input. An indoor Antenna (Digital or VHF / UHF), an External Antenna (Digital

or VHF / UHF) or an RF Coaxial Cable from your wall Cable / Satellite Set-top Box needs to be plugged into the Unit.

How come there is no

●

Check if the correct Input mode is selected by pressing

S

SOURCE

.

L p. 20

●

Check the Antenna, Cable or other Input Connection to the Unit.

image from the Connected

When using the Component Video Connection check that the Green (Y), Blue (Pb/Cb) and Red (Pr/Cr) connectors

External Devices?

●

are connected to their corresponding colored jacks on the Unit.

When I enter a channel

●

Many Digital channels have alternate channel numbers. The Unit changes the numbers Automatically to the ones signifying

number, why does it change

the Broadcasting Station's channel number. These basic numbers used for the previous Analog Broadcasts. (e.g., Input

Automatically?

Digital ch# 30 Automatically changes to Digital ch# 8.1)

Why are captions not

●

Closed Captions that are delayed a few seconds behind the actual dialog are common for Live broadcasts. Most captioning

displayed Entirely?

production companies can display a dialog to maximum of 220 words per minute. If a dialog exceeds that rate, selective

Or why are captions

editing is used to insure that the Closed Captions remain up-to date with the current TV screen dialog.

delayed behind the dialog?

How can I set the clock?

●

There is No clock function on this Unit.

My PIN code no longer

●

Although the default PIN code (0000) is supplied with the Unit, the PIN code will be required once you set a PIN code

works, how can I change the

in

Child and ratings lock

.

L p. 31

When you forget your PIN code, enter 0711 in

Change PIN

to reset the PIN code.

Child Lock setting?

L p. 33

When I start up the TV or

When you start up the TV or a net service after executing the software update, a message may appear on the screen

a net service, a message

●

appears on the screen

prompting for software update again. In this case, please select Update to start USB update or network update. L

prompting for software

p. 42

update again.