Philips DVD741VR VCR On-Screen Status Displays, If you select Status on and Counter only on

H9231CD(EN).QX3 02.9.5 7:13 PM Page 30

30 VCR On-Screen Status Displays

A status display will appear when you press DISPLAY/STATUS/EXIT or certain function buttons.The contents of the status display will vary.To choose the status display mode, follow the steps below.

●Before you begin, place the DVD/VCR in VCR mode. Press OUTPUT SELECT so the green VIDEO light appears on the front of the DVD/VCR. Press VCR/TV so the green VCR/TV light appears on the front of the DVD/VCR.

Receiving,

Recording

Mode

If you select STATUS ON and COUNTER ONLY ON:

●Whenever you press STOP C (p) or PLAY B (o) to stop or start tape playback, the status display will appear for five sec- onds. After five seconds, only the real-time tape counter will remain on the screen.You must press DISPLAY/STATUS/EXIT to remove it. Portions of the status display also may appear when you press other function buttons.

If you select STATUS ON and COUNTER ONLY OFF:

Tape status

STOP

TV STEREO

Channel

Time

12:00 AM CH10

STEREO 2ND AUD

●Whenever you press STOP C (p) or PLAY B (o) to stop or start tape playback, the status display will appear for five sec- onds. Portions of the status display also may appear when you press other function buttons.

If you select STATUS OFF:

●The status display will not appear when you press function but- tons.You must press DISPLAY/STATUS/EXIT to see the status display.

1 Press VCR, then press DISC/MENU.

2 Press PLAY B (o) or STOP C (p) to select VCR SET UP, then press FF g (B).

3 Press PLAY B (o) or STOP C (p) to select ON SCREEN MODE, then press FF g (B).

Press PLAY B (o) or STOP C (p) to select STA-
TUS, then press FF g (B) so ON or OFF appears
4 beside STATUS.
SELECT op CHOOSE B
→ STATUS	[ON]
COUNTER ONLY	[OFF]

TO END PUSH EXIT

5 If you set STATUS to OFF, go to step 6. If you set STATUS to ON, press PLAY B (o) or STOP C (p) to select COUNTER ONLY, then press FF g (B) so OFF or ON appears beside it.

6 Press DISPLAY/STATUS/EXIT.

SLP	M 1:23:45 HIFI
		Audio
Tape
		Out
Speed
		Mode
	Counter,
	Counter		MTS
	Memory
			Broadcast
			Available

Helpful Hints

•You may not access a status display when viewing a still picture, during slow motion playback, or during for- ward or reverse searching.

•The status display may not appear if a weak channel is selected and BLUE BACKGROUND is OFF. Details are on page 47.