Philips DVD741VR owner manual Black Level Settings, TruSurround Setting, SRS TruSurround on

H9231CD(EN).QX3 02.9.5 7:14 PM Page 71

Black Level Settings,TruSurround Setting					71
DVD
Black Level Settings				POWER
Adjust the Black Level Settings to make the black parts of the
		MARKER
DVD picture as bright as you prefer.		SETUP	AUDIO SUBTITLE	ANGLE
● Before you begin, place the DVD/VCR in DVD mode. Press
OUTPUT SELECT so the red DVD light appears on the front of		REC/OTR	REPEAT	REPEAT
				A-B
the DVD/VCR.
			CHANNEL/SKIP
			CLEAR
Press DVD, then press MODE once during DVD		TITLE	MODE	RETURN
playback so BLACK LEVEL shows in the top left			OUTPUT SELECT
1 corner of the TV screen.	1
		DVD		VCR	2
		DISC
		MENU		OK
Within 10 seconds, press OK repeatedly to choose
ON or OFF. ON brightens the dark parts of the picture.
2 OFF shows the original picture as recorded.		STOP		PLAY
BLACK LEVEL : ON		REW		FF

PAUSE

TruSurround Setting

POWER

You can enjoy improved stereo sound when you play DVDs or Audio CDs recorded in Dolby Digital, PCM 48 kHz, or MPEG Audio. Check the Disc case for details on availability.

MARKER

SETUP AUDIO SUBTITLE ANGLE

REC/OTR	REPEAT	REPEAT
		A-B

1 Press DVD, then press MODE twice during Disc playback so SRS TruSurround shows in the top left corner of the TV screen.

2 Within 10 seconds, press OK repeatedly to choose ON or OFF. The default setting is OFF. Choose ON only if you connected the DVD/VCR to a stereo that has a Dolby Digital or MPEG decoder. Make sure the current DVD is recorded in Dolby Digital, PCM 48 kHz, or MPEG Audio.

SRS TruSurround ON

This unit employs TruSurround system

of SRS Labs, Inc. as virtual technology.

TruSurround and the symbol are trademarks of SRS Labs, Inc. TruSurround technology is incorporated under license from SRS Labs, Inc.

		CHANNEL/SKIP
1		CLEAR
	TITLE	MODE	RETURN
		OUTPUT SELECT
	DVD		VCR	2
	DISC		OK
	MENU
	STOP		PLAY
	REW		FF
		PAUSE

Helpful Hints

•SRS TruSurround is available only when the DVD/VCR is connected to a TV or Stereo using the red and white DVD/VCR AUDIO OUT jacks on the DVD/VCR.

•If you connected the DVD/VCR to a stereo using the COAXIAL DIGI- TAL AUDIO OUT jack as described on page 13, turn off SRS TruSurround; otherwise, there will be no sound.