Philips DVD741VR Real-Time Tape Counter Memory, While the status display is on the screen, press

H9231CD(EN).QX3 02.9.5 7:13 PM Page 40

40 Real-Time Tape Counter Memory

VCR

Follow the steps below to reset the real-time tape counter to zero at a tape location you want to refer to later.

● Before you begin, place the DVD/VCR in VCR mode.

Press OUTPUT SELECT so the green VIDEO light appears on the	POWER
	MARKER
front of the DVD/VCR.

1

2

Press VCR, then play, fast forward, or rewind a tape to the location that you would like to refer to later. Press STOP C (p) to stop the tape.

Press DISPLAY/STATUS/EXIT to see the status dis- play.

SETUP AUDIO SUBTITLE ANGLE

REC/OTR	REPEAT	REPEAT
		A-B

CHANNEL/SKIP

CLEAR

TITLE MODE RETURN

OUTPUT SELECT

DVDVCR

DISC

MENUOK

3

1

	STOP		1:08PM
	TV STEREO		CH10
					STOP		PLAY
				5	REW		FF
	SLP	1 : 23 : 45	HIFI			PAUSE
							TIMER SET
3	While the status display is on the screen, press				1	2	3
							VCR/TV
	CLEAR to reset the real-time tape counter to zero.				4	5	6
							MEMORY
					7	8	9
	STOP		1:08 PM				SPEED
	TV STEREO		CH10		+10	0
					SEARCH MODE DISPLAY		ZOOM SLOW
					TIME SEARCH STATUS/EXIT
	SLP	0 : 00 : 00	HIFI
	While the real-time tape counter is on the screen,
4 press MEMORY so M appears beside the counter.
	STOP		1:08 PM
	TV STEREO		CH10

4

2

SLP M 0 : 00 : 00 HIFI

5 To go to a tape location where the real-time tape counter was reset to zero, press REW h (s) or FF g(B) when playback is stopped.

When the tape reaches the point at which the counter was set to zero, the tape will stop. Press PLAY B (o) to watch the tape.

Helpful Hints

•The MEMORY button does not function if REPEAT PLAY is ON. Details are on page 39.

•To erase a real-time tape counter memory, press MEMORY until the M disappears from the screen.

•You may only set the real-time tape counter to zero at one location at a time. Setting the real-time tape counter to zero at a second location will erase the previous zero setting.

•If you remove the tape, the counter will reset to zero at the point at which you last stopped playback whenever you reinsert the tape.