2x
TIMER
| VPS |
DATE REP. PROG. START PDC END | |
21 ONCE | 01 20:00 * 21:30 |
REP.PSELECT STOREPOK
Programming timer without VIDEO Plus+
1Press the TIMER button k twice
2The Timer screen will appear
3If necessary use =P- or ;P+ to select a free memory location and confirm with TIMER k.
What is a memory location? |
|
For technical reasons, your video recorder has access |
|
to a limited number of “drawers” in which you can |
|
store your programming requirements. “Drawers” |
|
occupied by programme recording details are only |
|
available for use again after the video recorder has |
|
successfully completed a programmed recording or if |
|
it has been manually deleted.Your video recorder can | PARDON? |
store up to six timer programmings. |
4Use S+ P or QS- to select the input field “DATE” and enter the date of your desired recording
Daily / weekly recordings |
|
If you like, you can use SELECT |
|
recordings which are repeated daily or “WEEK.” | FOR |
(weekly) for recordings which are repeated each | |
week on the same day. | EXPERTS |
5Use S+ P or QS- to select the input field “PROG.” and enter the programme number under which the video recorder has stored the desired TV channel
Enter the values correctly |
|
Numbers less than 10 must be entered with an | TIP |
additional “0”.Therefore for “9” you must enter “09”. |
6Use S+ P or QS- to select the input field “START” and enter the start time of the desired recording
Activate VPS/PDC |
|
VPS (Video Programming Service) and PDC signals |
|
(Programme Delivery Control) are transmitted by TV |
|
channels at the start and end of transmissions and |
|
ensure that programmes will be completely recorded, |
|
even if they are rescheduled. In the input field, | FOR |
“START” use SELECT to switch recognition of these | |
signals on (*) or off ( ). | EXPERTS |
ENGLISH | 31 | PROGRAMMING TIMER WITHOUT VIDEO PLUS |
|