SPECIAL SETTINGS
OSD | ON |
CLOCK DISPLAY | OFF |
COUNTER | QT.LEFTP |
SAT RECORDING | OFF |
REPEAT PLAY | OFF |
|
|
| OK |
What goes on behind the settings?
STEREO: Both left and right stereo sound tracks can be heard
LEFT: | The left stereo sound track can be heard |
|
RIGHT: The right stereo sound track can be heard |
| |
MONO: | The mono sound track can be heard |
|
MIX: | The mono sound track as well as the left and | TIP |
| right stereo sound tracks can be heard | |
2Press the SELECT button several times until the desired setting can be seen on the screen
Automatic
If no stereo signal is recorded on a video cassette, the video recorder automatically switches over to the “MONO” sound channel setting
Make dubbing audible |
|
When dubbing video recordings, the mono track is |
|
recorded with a new sound signal. The original stereo |
|
signal is retained. To make dubbing audible, you must |
|
select the “MIX” or “MONO” sound channel setting. | TIP |
|
Energy-saving mode
To reduce the power consumption of the video recorder you can switch the clock in the display of the video recorder on or off as follows:
1Press the MENU button on the remote control.The
2Use =P- or ;P+ to select the option “SPECIAL SETTINGS” and confirm with OK
3Use =P- or ;P+ to select the option “CLOCK DISPLAY”
4Use S+ P or QS- to select the setting “ON” or “OFF” and confirm with OK.The screen will show the message “STORED”
5Complete the adjustment of the clock display with the MENU button
ENGLISH | 41 | |
|