CONGRATULATIONS
YOU NOW OWN A NEW
PHILIPS
VIDEO RECORDER
CONTINUEPOK
AV2 EXT2
AUDIO OUT
ENGLISH
3Remove the aerial cable plug from the back of
your TV set and insert it into the aerial socket 2on the back of the video recorder
4Take the enclosed aerial cable and connect
the appropriate end to the aerial socket of your TV set and to the TV socket 3 on the back of the video recorder
5Take the enclosed mains cable and connect the appropriate ends to the mains socket 4 on the back of the video recorder and the other to the nearest free socket
6Switch on your TV set and select on your TV set the programme number which will in future be used for operation with the video recorder
7On your TV change the settings of this programme number until you see the adjacent welcome screen clearly and in colour on the screen
8There is no test image
4 Your video recorder “broadcasts” on the frequency 583MHz (CH35) in the UHF range (ultra highfrequency). Repeat the matching of the selected programme numbers on the TV set.
4 Check the cable connections | PROBLEM |
8Switch off the video recorder with the standby button m.
Connecting additional devices
Additional devices, such as a decoder, camcorder, satellite receiver, etc., can be connected to the scart socket AV2 EXT2 on the back of the video recorder. You will need a scart cable for this (available from specialist stores).
There are two audio output sockets on the back of the video recorder - AUDIO OUT L R.You can connect a stereo system to these.
9 | CONNECTING ADDITIONAL DEVICES |
|