?
M 5 8 3
OPTIMIZE MODULATOR
OPTIMIZE FREQUENCY Q583P
MODULATORON
EXITPMENU STOREPOK
6Confirm the new modulator frequency with OK. In the display there will briefly appear “OK”
7Leave the on-screen menu with the MENU button
Switching off the modulator |
|
If you have connected the video recorder to the TV set |
|
with a scart cable, you can switch off the modulator | FOR |
when there is interference with the picture or sound | |
(see below). | EXPERTS |
Switching the modulator on and off
If picture and sound interference cannot be removed by optimizing the modulator, the integral modulator can be switched off.Warning: this is only possible if you have connected the video recorder to the TV set with a scart cable. It is not possible to operate with the modulator switched off without a scart cable.
1Switch the video recorder on and make sure there is no cassette in the video recorder
2Press at the same time the STOP button h on the remote control and the STOP/EJECT button J on the front of the video recorder until the modulator frequency of the set appears in the display (e.g.: “M583” for 583 MHz)
3The video recorder will now transmit a test image on this frequency
4Use =P- or ;P+ to select the option
“MODULATOR”
5Use S+ P or QS- to select the setting “ON” (Modulator on) or “OFF” (Modulator off)
6Confirm with OK. In the display there will briefly appear “OK”
7Leave the on-screen menu with the MENU button
ENGLISH | 43 | SWITCHING THE MODULATOR ON AND OFF |
|