Philips VR 510/07 operating instructions 12Before you call an engineer, Problem

Page 44

12Before you call an engineer

PROBLEM

Set no longer reacts when buttons are pressed

The set is still not reacting, display shows e. g. „E000“

Cassette is jammed in video recorder

POSSIBLE CAUSE / SOLUTION

4 Mains power has been interrupted / failed

4 A programmed recording is running. Interrupt with the standby button m 4 Child lock is activated: Switch this function off

4Technical interference: Remove the mains plug from the socket and reinsert it

4 Remove the mains plug from the socket, hold down the standby button m on the front of the video recorder and reinsert the mains plug.When “--:--” or “E1”

appears in the display you can release m.Warning:All data memories of the set (TV channel, time, timer) have been deleted.

4 Do not use force! Briefly remove the mains plug and then reinsert it

Remote control does not work

No playback from video recorder

Poor quality playback from video recorder

4 Aim the end of the remote control at the display of the video recorder

4 Remove the batteries from the remote control and wait a few seconds before replacing them

4 Batteries weak or flat: Change the batteries

4 No recording on the cassette

4 Select the TV programme number allocated to video operation

4 Check that the TV channel number allocated to video operation is correct 4 Cable connection loose / missing: Check the connections

4 Check the TV to make sure that the programme number allocated to video operation is correct

4 Cassette worn / faulty

4Tracking not correctly adjusted: Carry out the “Optimizing tracking” function

No recording possible

4TV channel not stored or wrongly selected

4 Cassette with erase protection inserted

Programmed recording not working

Picture and / or sound interference in TV reception

4Wrong / incompletely programmed memory location

4Time / date not set correctly

4 Cassette with erase protection inserted

4 Optimize the modulator or switch it off (when using a scart cable) 4 Check the aerial cable connection

TV reception still not perfect

4The Department of Trade and Industry operates a specialist service to help TV licence holders improve reception of BBC and ITC programmes and to prevent interference. If your dealer cannot help, ask at a main Post Office for the booklet “How to improve Television and Radio Reception”.

 

TECHNICAL DATA

Dimensions in cm (W/H/D):

38,0/9,3/26,0

Energy consumption

16W

Energy consumption (Low Power Standby)

< 4W

Mains voltage:

198-264 V / 50 Hz

Number of video heads:

4

Number of audio heads:

1 linear, 2 FM

Rewind / forward wind speed:

approx. 100 seconds (E180 cassette)

Recording / playback speed (E240 cassette):

SP (Standard Play) 4 hours, LP (Long Play) 8 hours

 

 

PROBLEM SOLVING / TECHNICAL DATA

44

ENGLISH

 

Image 44
Contents Table of contents VR 510/07 WithRemote control Reduce TV volume+ P / QS Select next / previous programme number Stop or Standby modeWind forwardIntroduction Important notes for operationMost important functions of your video recorder VR 510/07Important information for customers in Great Britain Connecting the video recorder Preparing the remote control for operationConnecting to a TV set with a scart socket What is a scart cable?Connecting to a TV set without a scart socket ProblemRecorder.PROBLEM Back of the video recorderConnecting additional devices Switch off the video recorder with the standby button mAV2 EXT2 Audio OUTInitial installation Setting channel, date and time for the first timeInitial setting of channel, date and time is completed TIPManual Search What is a channel, or a special channel?Searching for a TV channel manually Allocating decoder Press the Menu buttonSearch and confirm with OK Using a satellite receiverManual Finish with the button Menu SettingsSearching for a TV channel automatically Sorting and clearing of TV channels manually Channel to the programmePosition set P ClearingChanging the time and date Leave the on-screen menu with the Menu buttonOperating instructions General informationNavigation in the main menu Call upPlayback Playing cassettesPlaying back Ntsc cassettes Press the Playback button C to play the tapeSpecial Settings Selecting tape position display typeConfirm With OK Use =P- or P+ to select the option CounterReset / display tape position ResetSearching for tape position with picture Picture search Normal once moreSearching automatically for tape position Index search Finding a blank position on tape automaticallyBookmark at the appropriate place on the tape Later by pressing a buttonStill picture / slow motion ForPlay compact VHS cassettes Those of a normal VHS cassette. The adapter isOptimizing still picture Removing picture interferenceOptimizing tracking End the recording by pressing the Stop button h Manual recordingStarting and stopping of recording manually Starting recording manually Stopping automatically Lining up manual recordings Selecting the recording speedStandard Play / Long Play / Auto Long Play Duration of the programmed recording,Is practically no loss of quality during transfer. We Recording automatically from a satellite receiverSAT Recording Programming timer with Video Plus+ Press the Timer button kProgrammed recordings Video Plus screen will appearConfirm with OK.The screen will show the message Stored Display will show kActivate VPS/PDC Or offProblem solving Video Plus-Programming Possible for Weekend with the STANDBY/ON button mProgramming timer without Video Plus+ Programming Timer Without Video Plus English Problem solving Timer programming And/or v are flashing in the display of the video recorderDisplay or off Turbo Timer-RecordingConfirm with the Turbo Timer button Problem solving Turbo Timer programming Error message CLKDelete / check / change programmed recordings It has been manually deleted10Other functions Adjusting automatic switch-offAdjusting the child lock Replaying cassette continuously Repeat PlayProcess and show several transmission systems Changing the TV systemTV systems Adjusting the OSD information Selecting the sound channelEnergy-saving mode Mono sound track can be heardMono sound track as well as the left Right stereo sound tracks can be heardThese signals are transmitted Display.PROBLEM11Suppressing interference Optimizing the modulatorSwitching the modulator on and off ModulatorProblem 12Before you call an engineerEnglish English Video recorder / display English