Philips VR810BPH Turbo Timer, Current channel number will appear on the display panel. To

44 Turbo Timer

This function allows you to set a timer recording without using the on-screen menus. Complete each step within one minute of the previous step. Use Turbo Timer to set a one-time recording within the next 24 hours only.

1

Insert a tape into the VCR and press the TURBO TIMER button on the remote control. The current time will appear on the display panel. (It will not appear on the TV screen.)

If “Err” (error) appears, either the clock is not set or you have set eight timer recordings already. The VCR will not let you set more than eight timer recordings.

SLP

VCR

2

To set the START time, press the PLAY 8 or STOP 9 button until the desired start time appears on the display panel. Every time you press a button, the start time changes in one-minute increments. If you press and hold a button, the start time changes in 30-minute increments.

When the correct START time appears, press the OK/STATUS button.

SLP

VCR

3

The START time will continue to appear on the display panel. To set the STOP time, press the PLAY 8 or STOP 9 button. Every time you press a button, the stop time changes in one- minute increments. If you press and hold a button, the stop time changes in 30-minute increments. When the correct STOP time appears, press the OK/STATUS button.

SLP

VCR

4

The current channel number will appear on the display panel. To

select the channel you want to record, press the PLAY 8 or STOP 9 button. Every time you press a button, the channel changes once. If you press and hold the button, the channels will change rapidly. When the correct channel number appears, press the OK/STATUS button.

SLP

VCR

5

The normal display will appear, and the r light will appear on the display panel.

Press the POWER button to turn off the VCR. Leave the Cable Box/DBS on if applicable.

1Insert a tape into the VCR.

	SAT/
	CBL/DBS				TV		VCR
5	VCR/TV			POWER SMARTPICTURE
		QUICK PROGRAMMING
	1— +* + 2 ABC + 3 DEF
	START			STOP		DATE
	4 GHI - 5 JKL - 6 MNO
	VPS/PDC			DAILY		WEEKLY
	7PQRS			8 TUV		9WXYZ
	SPEED			DBS/SAT
	ALT			0		CLEAR
	-		STILL/SLOW				+
		..........			..........
2-4	REW						FF
				STOP
				PLAY
	VOL		OK/STATUS				CH
				MENU
				TIMER
1	TURBO		AUDIO/		SKIP		TAPE
	TIMER		MUTE		SEARCH MANAGER

Helpful Hints

•The Program Overlap Warning does not function with Turbo Timer. The timer recording with the earliest start time will record. Then, the remaining portion of the later recording will record.

•To exit Turbo Timer mode at any time, press the TURBO TIMER button.

•Tape speed can be selected at any time during steps 1-4 by pressing the ALT/SPEED button.

•If you are using a DBS with the Controller and have selected a channel between 100-199, you may need to specify whether the channel is for Cable TV or Satellite TV (DBS). Press the Number 0 (DBS) button repeated- ly to select either the DBS mode (“D” indicator appears on the display panel), or CABLE/TV (no indicator appears next to the channel number).