Philips VR810BPH owner manual Audio cable, Blinks and appears on the VCR display panel

Audio Dubbing replaces the normal audio of a previously recorded video tape with a new soundtrack.

	VR 1010 4 HEAD HI-FI STEREO
	VIDEO CASSETTE RECORDER
			SUPER VHS ET			STOP/EJECT
	S-VHS ET	VCR/TV
	POWER
			CRYSTAL CLEAR VIDEO	TAPE MANAGER	TURBO TIMER
		MENU
		AUDIO
OPEN	A/V FRONT CONNECTORS	DUBBING				REC/OTR
		OK/STATUS		VCR	CHANNEL	PAUSE/STILL	PLAY
							TURBO
							DRIVE

Audio cable

1

Connect the red and white audio cables to the AUDIO OUT jacks on the audio equipment and to the AUDIO IN jacks on the VCR. If the audio equipment has a single AUDIO OUT jack, connect only the white audio cable to the AUDIO OUT jack on the audio equipment and to the white AUDIO IN jack on the VCR. You will not use the red audio cable.

2

On the VCR remote control, press the VCR button, then press the Number 0 button. Press the CH(annel) 8/9 button so that A/V IN FRONT or

A/V IN REAR appears on the screen (or L-F or L-1 appears on the VCR display panel).

3

Insert the video tape onto which you want to record the new soundtrack. Press the PLAY 8 button to play the tape, then press the PAUSE/STILL button when you find the point at which you want to start dubbing.

4

Press the AUDIO DUBBING button on the front of the VCR. blinks, and and light on the VCR display panel.

5

On your audio equipment, find the starting point of the soundtrack, then pause play at that point. Then, press Play on the audio equipment and PAUSE/STILL on the VCR at the same time to start dubbing.

blinks and appears on the VCR display panel.

6

When you are finished dubbing, press STOP/EJECT on the VCR once to stop the video tape, then stop the soundtrack on your audio equipment.

Audio Dubbing 49

Audio equipment (CD player etc.)

Helpful Hints

•If MONO is selected, you will hear the new soundtrack during dubbing. If HIFI is selected, you will hear the tape’s origi- nal audio during dubbing.

Likewise, after dubbing is finished and you are watching the tape, you will hear the original audio if HIFI is selected. You will hear the new soundtrack if MONO is selected.

Choose HIFI or MONO by pressing the VCR button, then pressing the AUDIO/MUTE button on the VCR remote control repeatedly.

•Audio dubbing stops automatically when the counter reaches “0:00:00,” and normal tape playback resumes. Check the counter reading before you begin dubbing.

•Make sure the video tape’s record tab is intact.

•Choose A/V IN FRONT at step 2 if you connected the audio cables to the jacks on the front of the VCR. Select A/V IN REAR at step 2 if you connected the audio cables to the jacks on the back of the VCR.