Philips VR810BPH owner manual Rerecording Tape Duplication

48 Rerecording (Tape Duplication)

The instructions on this page show you how to copy tapes. Different VCRs may operate differently. To duplicate a tape, make the connections shown, then follow steps 1-6. (You may use the AUDIO and VIDEO In jacks on the front of VCR 2 instead if you prefer.)

		3) Use an RF coaxial cable to con-
VCR 1	VCR 2	nect the TV OUT Jack on VCR 2
	Recording VCR	to the TV’s ANTENNA IN Jack.
Playing VCR

					LP 20917-003					LP 20917-003
		OUT	IN			VIDEO	OUT	IN		VHF/UHF
VIDEO					VHF/UHF
									ANTENNA IN
	(MONO)			ANTENNA IN		L	(MONO)
L
							S VIDEO		CABLE BOX
		S VIDEO		CABLE BOX		AUDIO
AUDIO
R						R			CH3	CH4
				CH3	CH4					TV OUT
					TV OUT	OUT	IN
OUT	IN
					audio cables

	1) Use audio cables to connect the AUDIO OUT
	Jacks on VCR 1 to the AUDIO IN Jacks on VCR 2.
video cable	2) Use a video cable to connect the VIDEO OUT
	Jack on VCR 1 to the VIDEO IN Jack on VCR 2.

1

VCR 1 will play your tape. Insert a prerecorded tape in VCR

1.If the tape does not have a record tab, playback begins. If this happens, press the STOP/EJECT button on VCR 1 once.

2

VCR 2 will record your tape. Insert a blank tape in VCR 2.

Make sure the VCR power is on and the VCR is in VCR position. (The VCR light will appear on the display panel. If it does not, press the VCR/TV button once.)

3

Turn on the TV; set it to channel 3 or 4, whichever channel the CH3/CH4 switch on VCR 2 is set to.

4

Point the remote control at VCR 2. Press the VCR but- ton, then press the Number button 0. Press the CH(annel) 8/9 button so that A/V IN FRONT or A/V IN REAR appears on the screen (or L-F or L-1 appears on the VCR display panel). See Helpful Hints at right.

5

Point the remote control at VCR 2. Press the ALT/SPEED button to select SP or SLP.

6

Press the PLAY button on VCR 1 and the REC(ord)/OTR button on VCR 2 at the same time. The \ light will appear

on the VCR 2 display panel.

Helpful Hints

•Unauthorized recording of copyrighted television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws.

•If a program has copyright protection, it may not record clearly.

•To stop copying tapes, press the STOP/EJECT button on VCR 2, then press STOP/EJECT on VCR 1.

•For VR1010BP only: If you connect the audio and video (or S-video) cables to the AUDIO/VIDEO In (or AUDIO/S-VIDEO In) jacks on the front of VCR 2, you must select A/V IN FRONT at step 4. Then, select VIDEO or S-VIDEO at FRONT A/V INPUT in the VCR SET UP menu.

If you connect the audio and video (or S-Video) cables to the AUDIO/VIDEO IN (or AUDIO/S-VIDEO IN) jacks on the back of VCR 2, you must select A/V IN REAR at step 4. Then select VIDEO or S-VIDEO at REAR A/V INPUT in the VCR SET UP menu.