Philips VR810BPH If you forget to turn off the VCR, To check your timer recordings, see

Page 39

Timer Recording with the VCR Plus+ Programming System (cont’d) 39

5

Press the OK/STATUS button. If the VCR PLUS+ and CABLE/TV channel lists appear on the screen, the CABLE/TV chan- nel has not been set for the VCR PLUS+ channel of the program you have set in step 4. Press the Number buttons to enter the CABLE/TV channel number from your list on page 36, then press the OK/STATUS button.

6

•If you want to record the program one time only, go to step 7. You also may press the Number 8/DAILY or Number 9/WEEKLY button repeatedly to select a ONE TIME PROGRAM.

•If you want to record the program daily, press the Number 8/DAILY button so that DAILY PROGRAM appears at the top of the screen. The VCR will record a pro- gram every day from Monday through Friday, starting at the same time and recording for the same length of time.

•If you want to record the program every week, press the Number 9/WEEKLY button so that WEEKLY PROGRAM appears at the top of the screen. The VCR will record a pro- gram on the same day, at the same time, for the same length of time every week.

DAILY PROGRAM (MON-FRI)

PROGRAM

1

 

CHANNEL +/– 12

 

START +/–

08:00

PM

STOP +/–

10:00

PM

REC SPEED

SLP

 

DATE +/–

06/21/00

 

WEDNESDAY

DAILY: 8

 

WEEKLY: 9

CONFIRM: OK

 

END: TIMER

7

Press the ALT/SPEED button to select the tape speed. The selected tape speed, SP or SLP, will appear beside REC SPEED.

8

Press the OK/STATUS or TIMER button. PROGRAM WAS COMPLETED/PLEASE TURN OFF VCR FOR TIMER RECORDING should appear on the screen. (If PROGRAM NOT COMPLETED appears, begin again from step 1.) After five seconds, the on-screen display will disappear.

9

Press the POWER button to turn off the VCR. The VCR must be turned off for a timer recording to take place.

The r light will appear on the display panel. The r light and the Cassette-Inside light will flash when you turn off the VCR if there is not a tape in the VCR.

Turn off the VCR for a timer recording!

Put a tape in the VCR.

Leave the Cable Box/DBS on.

 

SAT/

 

 

 

 

 

 

CBL/DBS

 

TV

VCR

 

9

VCR/TV

 

POWER SMARTPICTURE

 

QUICK PROGRAMMING

 

1— +* + 2 ABC + 3 DEF

 

START

STOP

DATE

 

 

4 GHI - 5 JKL - 6 MNO

 

 

VPS/PDC

DAILY

WEEKLY

6

7

7PQRS

8 TUV

9WXYZ

SPEED

DBS/SAT

 

ALT

 

0

 

CLEAR

 

STILL/SLOW

 

-

 

.......... +

 

 

REW

 

 

 

FF

 

 

 

 

PLAY

 

 

 

 

 

STOP

 

5

 

VOL

OK/STATUS

CH

 

 

 

 

 

 

MENU

 

 

 

 

TIMER

 

8

 

TURBO

AUDIO/

SKIP

TAPE

 

TIMER

MUTE

SEARCH MANAGER

Helpful Hints

•Do not select DAILY at step 6 if the VCR Plus+ recording you chose is on a Saturday or Sunday. The recording will not occur, even though the VCR may accept the way you programmed the recording.

•To exit the VCR Plus+ programming system at any step, press the TIMER button.

•If the timer recording you just pro- grammed overlaps another timer recording, PROGRAM NOT COM- PLETED/PROGRAM OVERLAP will appear. Details are on page 46.

•If you forget to turn off the VCR,

PLEASE TURN OFF VCR FOR TIMER RECORDING flashes on your TV screen two minutes before a timer recording is set to begin. To remove the message, press the CLEAR button.

•To check your timer recordings, see page 45.

•The r light will flash if the clock is not set (if the clock setting was erased after you set up the timer recording). Be sure to set the clock before the timer recording is scheduled to begin.

Page 38 Page 40
Image 39
Page 38 Page 40
Contents VR810BPH For Customer Use Dear Philips product ownerPicture Quality FeaturesSafety Precautions IntroductionTable of Contents VCR Maintenance/Video Head Cleaning Before Using Your VCRPutting Batteries in the Remote Control Using the Remote ControlDisconnect the antenna or cable from your TV Hookups without a Cable BoxAntenna Or Cable Hookups without a Cable Box cont’dRecording/Viewing Any Channel Cable signal RF coaxial cableHookups with a Cable Box/Direct Broadcast System ConnectionsTV’s Recording One Channel/Watching AnotherWith this connection 2RF coaxial cableTurning on Your VCR Menu shown below will appearTurn on the TV Turning on Your VCR cont’d Press the VCR button, then press the Menu button Automatic Channel SetupAutomatic Channel Setup cont’d Adding/Deleting ChannelsSelected channel To make corrections, follow steps Setting the ClockManual Clock Setting Channels are set up. Details are onSetting the Clock cont’d Time Zone Selection Setting the Clock cont’dManual PBS Channel Selection Automatic PBS Channel Selection Daylight-Savings Time CBL/DBS VCR VCR/TV PowerLanguage Selection Press the Play 8 or Stop 9 button to select LANPress the Menu button Line Input Mode Remaining Tape Time Indicator VCR Display Panel VHS Indicator VR1010BP onlyTape Speed Timer Light Lights Turbo Timer indicatorsFront Panel Rear Panel Remote Control Buttons ALTernate Channel Turbo Timer ButtonTimer Button SAT/CBL/DBS ButtonRepeat step Setting the Remote Control to Operate a TVFind the code for your Turn on your Satellite Receiver/Cable Box/DBSPress the Play 8 or Stop 9 button to select on If on Screen Mode is set to on orRead and follow the steps below to play a tape Playback options and features are on pagesWhen you insert a tape, tape manag PlayingAppear on the display panel VCR records in a preset volumeRecording Press the VCR buttonVHS Recording VR1010BP only VHS ET VR1010BP only VCR light will disappear from the display panel Recording One Channel/Watching AnotherChannels are set up. Details are on pages One-Touch RecordingStarting an OTR Record Link Setting Up the VCR Plus+ Programming System Channels Call Letters 2on Examine the listsTimer Recording with the VCR Plus+ Programming System If you forget to turn off the VCR To check your timer recordings, seeChannels are programmed. Details are on pages Quick ProgrammingTape Speeds Instructions continue onQuick Programming cont’d Helpful Hint Turbo Timer Current channel number will appear on the display panel. To1Insert a tape into the VCR Indicates a Daily recording Checking, Editing, or Clearing Timer RecordingsProgram Review Indicates a Weekly recordingInformation about the chosen program will appear Or, to cancel the timer recording, press the Clear buttonProgram Overlap Warning Press the OK/STATUS button to select the programFollow the steps below to set Timer REC Speed to Auto Timer Recording Speed SettingVCR 1 will play your tape. Insert a prerecorded tape in VCR Rerecording Tape DuplicationMake sure the video tape’s record tab is intact Audio cableBlinks and appears on the VCR display panel Audio equipment CD player etcConnecting the Controller Connect the Cable signal toCable Box/DBS Controller Connect the Controller Make sure the clock is set. You must set the clock manually Setting the Controller to Operate a Cable BoxWait for a few seconds Setting the Controller to Operate a Cable Box cont’dSetting the Controller to Operate a DBS Channel other thanWill learn your DBS code 7Wait for a few seconds Setting the Controller to Operate a DBS cont’dMulti-Channel Television Sound System Receiving a Stereo BroadcastReceiving a Second Audio Program Record the program as usual. Details are on Multi-Channel Television Sound System cont’dHi-Fi Stereo Tape Playback Or special effects playback Video StabilizerSmartPicture Digital Studio Picture Control To provide the highest possible picture qualityTo set Dspc to on or OFF, follow these steps Skip Search Press the Stop 9 button to cancel a Skip SearchSearch Options Index SearchViewing a Slow Motion Picture Playback OptionsForward and Reverse Searching Viewing a Still PictureWill light Viewing a Picture in Slow to Fast MotionPress the VCR button, then press the Tape Tape ManagerFind a Title Insert a tape that was recorded with this VCRCheck Memory screen appears Tape Manager cont’dCheck Memory Press the Play 8 or Stop 9 button to select CheckEdit Title If you don’t see the tape title or proTape titles may have up to 10 characters Selected program Entering CharactersFootball Sorting by Tape NumberSorting by Date As follows, for example Sorting by CategoryReview the tape portion to make sure it is blank Find Blank SpaceIf you want to erase more information, repeat steps Deleting Tape or Program InformationYou can disable the Tape Manager if you don’t want to use it CL will disappear from the display panel When Child Lock is activatedChild Lock CL will blink intermittently on the display panelTo set Blue Background to on or OFF, follow these steps Blue BackgroundAutomatic Operation Features Glossary Helpful Hints Helpful Hints cont’d Video Cassette Recorder or Player Limited WarrantyCheck or money order Account number Limited Warranty cont’dTo obtain a replacement product from Philips Payment AmountSpecifications Cable box Remote controlTimer AutomaticSupplied Accessories
Top Page Image Contents