Philips VR810BPH owner manual Search Options, Index Search, Skip Search

Index Search

When you make a recording, the VCR automatically places an index code at the beginning of the recording. Essentially, an index code is a type of “bookmark” for your tape. This feature is useful if you have several different programs recorded on a single tape. Fast forward or rewind to the next or previous index code on the tape by following the steps below.

1

Press the VCR button. Make sure the VCR is in VCR position. (The VCR light will appear on the display panel when the VCR is in VCR position.) If the VCR light does not appear, press the VCR/TV button once.

2

Insert a tape in the VCR. Press the INDEX SEARCH --7button to fast forward to the next index code on the tape. Or, press the INDEX SEARCH button 7// to rewind to the previous index code on the tape (or to the beginning of the current recording).Wait for the VCR to fast forward or rewind the tape.When the index code is reached, tape playback will begin automatically.

NOTE: You may press an INDEX SEARCH button repeatedly to skip over multiple recordings. For example, if you want to fast for- ward past four recordings, press the INDEX SEARCH --7but- ton four times. INDEX 4 will appear in the bottom right corner of the screen. The index codes will count down on the screen as the search progresses. (ON SCREEN MODE can not be set to OFF. Details are on page 28.)

Search Options 61

SAT/

CBL/DBS TV VCR

VCR/TV POWER SMARTPICTURE

QUICK PROGRAMMING

1— +* + 2 ABC + 3 DEF

START		STOP	DATE
4 GHI - 5 JKL - 6 MNO
VPS/PDC		DAILY	WEEKLY
7PQRS		8 TUV	9WXYZ
SPEED		DBS/SAT
ALT		0	CLEAR
-	STILL/SLOW			+
	..........		..........
REW				FF
		PLAY

STOP

VOL OK/STATUS CH

MENU

TIMER

TURBO AUDIO/ SKIP TAPE

TIMER MUTE SEARCH MANAGER

Skip Search

This function enables you to skip forward 30 seconds at a time during tape playback.

1

During tape playback, press the VCR button, then press the SKIP SEARCH button. Each time you press the SKIP SEARCH button, the tape will skip forward 30 seconds, then resume normal playback. You can skip up to two minutes at a time using Skip Search.

Helpful Hints

•To stop an Index Search that is in progress, press the STOP 9 button.

•The VCR does not place an index code at the point where a recording is paused, then resumed.

•INDEX may flash on the screen briefly when you begin a recording.

•Press the STOP 9 button to cancel a Skip Search.

•If the end of the tape is reached dur- ing a Skip Search or an Index Search, the VCR will cancel the search and rewind the tape.

•The Index Search will not work if the Tape Manager is in use. Details are on pages 64-73.