Stamina Products 55-5686B owner manual Step

Page 11

ASSEMBLY INSTRUCTIONS

NOTE: The UPRIGHT TUBES(34) must be installed with the adjustment holes (not shown) facing away from the AeroPilates Pro XP686.

STEP 9

Attach the REAR WOODEN PLATFORM(33) to the REAR FRAME(29) with BUTTON HEAD BOLTS (M8x1.25x35mm)(88) from the top and FLAT HEAD SCREWS(M4.5x15mm)(99) from the bottom.

STEP 10

Insert the UPRIGHT TUBES(34) into the REAR FRAME(29) with the series of adjustment holes in the UPRIGHT TUBES(34) facing toward the back and secure with BUTTON HEAD BOLTS(M8x1.25x35mm) (88).

STEP 11

Attach the HANDRAIL(30) to the REAR FRAME(29) with FLAT HEAD BOLTS(M6x1x15mm)(93) and

FLAT HEAD BOLTS(M8x1.25x15mm)(94).

STEP 12

Attach the REAR WOODEN COVER(31) to the REAR FRAME(29) with BUTTON HEAD BOLTS (M8x1.25x25mm)(86). Press the LEFT and RIGHT RAIL CAPS(11, 12) into the LEFT and RIGHT RAILS (9, 10).

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents This Product is Produced Exclusively by Safety Instructions Table of ContentsCall US First AeroPilates Pro XP686 Before YOU BeginEquipment Warning & Notice Labels Hardware Identification Chart Step Assembly InstructionsRight RAIL10 Assembly Instructions RightAssembly Instructions Assembly Instructions Step BOLTSM8x1.25x15mm85 Tie a knot large enough To stop by ring B Lug Detail Drawing Side Roller AdjustmentGear System Operational Instructions Load AdjustmentFootbar Adjustment Headrest Adjustment Operational Instructions Pulley Slider AdjustmentRope Length Adjustment Storage Operational Instructions Shoulder PAD AdjustmentMaintenance Target Heart Rate Zone Estimated by Age Conditioning GuidelinesWARM-UP and COOL-DOWN Limited Warranty Product Parts Drawing DIAGRAM# Part Name QTY Parts ListParts List Parts List Page Stamina Products, Inc Box Springfield, MO FAX/MAIL Ordering Form
Top Page Image Contents